Used Machine Tools in Gauteng, South Africa

Cable Jacket Slitter, FTTH Fiber Optic Slitter

Compact design, light weight, portable 4 guide rails for tubes with different diameters Composed with high quality metal blades, more durable High precision rail design, ensure the integrity of the fiber RoHS com...

IWM HYDRAULIC DOOR PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed 5 Cylinder press (3 Vertical, 2 horizontal) 380V / 3 phase

IWM R20 ECCENTRIC PRESS

• Manufacturer: Unknown

Adjustable stroke Capacity: 20 ton | Strokes per minute: 150 | Bed: 570 x 440

RASKIN R20 ECCENTRIC PRESS

• Manufacturer: Raskin

Adjustable stroke Capacity: 20 ton | Strokes per minute: 158 | Bed: 450 x 350

RASKIN R100 ECCENTRIC PRESS

• Manufacturer: Raskin

Fully serviced and in very good working condition. Adjustable stroke

IWM PNEUMATIC LAMINATING PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed Suitable for panels, tabletops and beams 9 x Pneumatic cylinders (Can operate individually) 9 x Mechanical hold downs

Free vibrations in a bending beam (SE 110.58)

natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...

Beam on two supports: bending moment diagram (WP962)

application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...

Assembly of bending device (TZ 200.11)

GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...

Deformation of bars under bending or torsion (WP 100)

elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...

Graded Control Stone TO BS812-114, EN1097-8 (LAG150/G)

20kg Graded. -10mmSHPP +7.2mm slot Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, t...

PSV Tyred Wheel TO BS812-114, EN1097-8 (LAG139/3)

For Corn or Flour Emery to EN 1097:3, ASTM C29-97, AASHTO T19-93, BS 812, UNI 8520 :6, ISO 6872, CNR N. 62, CNR N. 63, CNR N. 64 Due to the continuous development of our products, the goods supplied may vary in d...

Flour Emery TO BS812-114, EN1097-8 (LAG146)

20kg bag (graded). Used in the second 3 hours of the polishing operation to polish the samples BS812-114. Material Safety Data Sheet available in PDF format Due to the continuous development of our products, the ...

Criggion Stone TO BS812-114, EN1097-8 (LAG151)

20kg ungraded. Used in the Skid Tester for calibration purposes. BS812-114 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Sand Graded for AAV (LAG172)

• Manufacturer: Arena

20kg to BS812-113 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.