- Auction
PIPE THREADER, RIDGID 535. S/N EAM13620B97 (Located at: Industrial Material Corporation, 7701 Harbor
- Manufacturer: Ridgid
PIPE THREADER, RIDGID 535. S/N EAM13620B97 (Located at: Industrial Material Corporation, 7701 Harborside Dr, Galveston, TX 77554)
Galveston, TXVisit Auction Website - Trusted Seller
ETTCO ATU-4 PRODUCTION TAPPING MACHINE AND TAPPING UNIT T151487
- Manufacturer: Ettco
4" of lead screw travel • 30 cycles per minute possible • Swivel mounted operator interface terminal, with English or Spanish display • Programmable controller • 3.5 HP, 1140 RPM high reversing motor 230/460 VAC,...
$1,980 USDEl Paso, TX 
HORIZONTAL DRILLING AND TAPPING MACHINE, DIE CAST | INDUSTRIAL MACHINE | HYPNEUMAT INC.
- Manufacturer: Hypneumat Inc
Product Description This pneumatic feed and clamping system from Hypneumat Inc. is a specialized industrial equipment designed to automate processes such as drilling and tapping in production lines. Equipped wit...
Laredo, TX
Ridgid No. 811 Universal 1/8'' to 2'' Die Head w/Threading Dies 1/4''
- Manufacturer: Ridgid
Ridgid Universal Die Head No. 811 1/8'' to 2'' Pipe 1/4'' to 2'' Bolt 1/4'' Dies Included
$210 USDUnited States
Tapmatic Reversible Tapping Head NCR50 W/ Cat 50 Toolholder 2500 RPM
- Manufacturer: CST Tapmatic
CST Tapmatic CAT 50 Taper Tapping Head Part #: NCR50 95% Feed Rate M12 Taps 2500 RPM Max Capacity: 1/2''
$605 USDUnited States
Ridgid No. 811 Universal 1/8'' to 2'' Die Head w/Threading Dies 1/4'' - 3/8''
- Manufacturer: Ridgid
Ridgid Universal Die Head No. 811 1/8'' to 2'' Pipe 1/4'' to 2'' Bolt 1/4'' - 3/8'' Dies Included
$210 USDUnited States
Tapmatic Model #NCR1A Reversible Tapping Attachment w/CAT 40 Holder 1/2'' Cap
- Manufacturer: TAPMATIC
Tapmatic Reversible Tapping Head w/CAT 40 Taper Holder Model #: NCR1A Max Capacity: 1/2'' or M12 2000 RPM Max
$225 USDUnited States
Tapmatic M12 Part #NCR1A, 1/2" Reversible Tapping Head Attachment 2000 RPM Max
- Manufacturer: Kennametal
Kennametal Tapmatic Reversible Tapping Head Attachment M12 1/2'' Part #: NCR1A 2000 RPM Max CAT 50 Taper
$200 USDUnited States
Tapmatic N/C-R Reversible Tapping Head 4 1/4'' M2.5-M7 Size w/50 Taper Holder
- Manufacturer: Tapmatic
Tapmatic Reversible Tapping Head Attachment Model #: N/C-R 4 1/4'' M2.5-M7 Size Taps Max RPM: 3000 CAT 50 Taper Tool Holder
$300 USDUnited States- Trusted Seller
GROB RMOD
- Manufacturer: Grob
Equipped With Capacity: 1-15/16" | Spindle speeds: 22-502 | Spindle dia: 1.25"
United States - Trusted Seller
2006 KIA Kiacenter V25
- Manufacturer: Kia
- Model: KIACENTER V25
KIA V25 CNC Vertical Machining Center New 2006 Control: Fanuc | Equipped with: Fanuc Control 16 ATC Coolant tank and pump | X-axis: 16.0 in | Y-axis: 15.0 in | Z-axis: 15.0 in | Rpm: 8000.0 rpm | # atc: 16.0
United States - Trusted Seller
WATERBURY #20
- Manufacturer: Waterbury Farrel
- Model: 20
- Threading length: 127 millimeter
Equipped With * Heavy Frame * V-ram * Top side feed rolls & cutoff for feeding wire from coil
United States - Trusted Seller
WATERBURY FARREL #20
- Manufacturer: Waterbury Farrel
- Model: 20
Equipped With Rotovane Hopper Maximum thread diameter: 3/8" | Maximum thread & shank length: 3" | Production: 125ppm | Electrics: 400/440 Volts 3 PH 50 HZ | Motor: 10 HP | Weight approx.: 8,000 LBS
United States - Trusted Seller
WATERBURY #20
- Manufacturer: Waterbury Farrel
- Model: 20
Equipped With * Heavy Frame * V ram Max. thread dia.: 3/8" | Die pocket: 5-1/8" | Output: 50 PPM | Weight: 6,000 lbs.
United States - Trusted Seller
LOT OF 10000 0604RTP PAN TORX GENUINE TAPTITE II THREAD ROLLING SCREWS T196568
6-32" x 1/4", Fully Threaded, Steel Zinc, Rockwell C28-38 Extra Information Brand: Unbranded MPN: 0604RTP Lot Q: 10000 Shipping Weight: 20 LBS Shipping Dimensions: 9 (in) × 10 ...
$125 USDEl Paso, TX
Tip: Enter manufacturer, model or keyword