Used Threading & Tapping in USA

Tote of MIKE-O-CUT LV Light Viscosity Tapping Fluid 275 Gallons Weight 2330 LBS

• Manufacturer: ASHBURN

Stantec Sales & Services is Offering the Following Equipment: Tote of MIKE-O-CUT LV Light Viscosity Tapping Fluid 275 Gallons Weight 2330 LBS Tote has been open but has been barley used. MIKE-O-CUT LV is a light ...

Jarvis Cutting Tools 5/8-18 H10B 6LG JARFLO VHP-CO Made In THE USA

• Manufacturer: Jarvis Cutting Tools

Jarvis Cutting Tools 5/8-18 H10B 6LG JARFLO VHP-CO Made In THE USAMake: Jarvis Cutting ToolsModel: H10B 6LG JARFLO VHP-COCondition: New Quantities: Packs Of 6, 13 Of Them$25 Each $290 For All Of themTap Size: 5/8...

141H Drill and Tap Spider or U-joint

Servo units all the way around, this machine drills and counterbores the grease ports, and drills and pipe taps the Zerk Fitting hole. For other custom machine needs, contact (6) Servo Ballscrew drilling and ta...

125H Custom Vertical Machine with (2) Servo Tapping Units.

The customer already had the fixtures for this self-feeding servo tapping machine. Hause design a new layout with 2-axis ballscrew unit. For other custom machine needs, contact 3″ stroke dual-axis servo ballscrew...

124H 8-Station Dial Index Machine For Drilling And Tapping Chain Shackles

This machine has 5 machining stations, 1 loading, and 1 unloading. Operator loads and actuates the machine, which then center drills, drills, and taps the chain shackles. The machine also unloads the parts auto...

930H Four Station Wheel Hub Drill, Ream and Tapping Machine With Gantry Transfer

This machines takes a large steel wheel hub directly from the incoming conveyor, rotates the part into the on-car position, gantry transfers the part to be drilled and reamed for the lug holes. It also adds in t...

Cedarberg EZ Tapper

• Manufacturer: Cedarberg

Lot 39 Cedarberg EZ Tapper Hand Tapping Machine with Taps and Work Bench

Procunier 3

• Manufacturer: Procunier

Lot 144 Procunier Model 3 Tapping Head Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 0.00"  Width: 0.00"  Height: 0.00" | Dock door: 12' x 14' H Door Ground Level Doors | Loading d...

Walker Turner 70-400

• Manufacturer: Walker Turner

15.5" x 18" Table, 70-400 RPM, 10" Throat, Jacobs Ball Bearing Super Chuck, Face Guard 208-220, 440 Volt, 3 Phase

Delta Rockwell 70-6XU

• Manufacturer: Rockwell

Adjustable Height 22" x 18.5" T-Slot Work Table w Oil Gutters with 15.5" x 18" Work Surface, 6" Hand Quill Feed, 200 - 2,000 RPM Variable Speed Spindle, Jacobs Ball-Bearing 0-1/2" Drill Chuck, #3 MT, Machined Bas...

Sacma SP-22 Threading & Tapping

• Manufacturer: Sacma
• Model: SP-22

Good condition Sacma SP-22 Threading & Tappings available between 1968 and 1976 years. Located in Italy and other countries. Click request price for more information.