Used Threading & Tapping in Ohio, USA

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER

• Manufacturer: Snow

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER #6 to 5/16" Rated Capacity in Mild Steel 2" Tap Head Stroke 4000 Tapped Holes Per Hour 70-100 Lbs. Main Air line Pressure Equipped with Speedy Cut ST1-KU Head and Vibra...

SHIMAZU 3NF 3/8" TWO SPINDLE NUT TAPPER

• Manufacturer: SHIMAZU

M5 - M10 tapping range 8mm - 15mm min-max across flats 1400 -2100 RPM Equipped with Standard Hopper NOTE - Bulk loader in photos is not included

1-1/2" DOUBLE LANDIS PIPE AND NIPPLE THREADER

• Manufacturer: Landis

SACMA MODEL SP22 COLD HEADER

• Manufacturer: Sacma
• Model: SP-22

Sacma SP 22, 2 die 2 blow cold header Maximum diameter - 6 mm Maximum cutoff length - 110 mm Maximum length under head - 100 mm PPM - 170

3" WAGNER THREADER, #WGL/30683

• Manufacturer: Wagner

O.A. DIM. - 121" X 46" X 58" WEIGHT - 5,465 LBS. EQUIPPED WITH: MOUNTED COOLANT LUBRICATION PUMP 559 VOLT 1150 RPM 5.5 AMP 3 PHASE MOTOR E

1/2" X 3-1/2" SACMA MODEL SP-37, 4-DIE 5-STATION BOLT MAKER

• Manufacturer: Sacma
• Model: SP-37

1/2" X 3-1/2" SACMA MODEL SP-37, 4-DIE 5-STATION BOLT MAKER Built by................................. Sacma Limbiate s.p.a. Year....................................... 1994 Model....................................

3/4" LANDIS SINGLE THREADER

• Manufacturer: Landis

LANDIS 4" THREADER W/ MOTOR & CONTROLS

• Manufacturer: Landis

LANDIS 4" THREADER W/ MOTOR & CONTROLS 2-1/2" TO 4" PIPE & BOLT

2-1/2" LANDIS DOUBLE PIPE AND NIPPLE THREADER

• Manufacturer: Landis

2-1/2" Landis Double Pipe and Nipple Threader Specifications: Capacity: 1/2" to 2-1/2" Diameter RPM of Die Heads: 28, 37, 48, 62, 64, 66, 83, 115, 150 RPM Drive Shaft: 460 Carriage Travel: 14" Motor: 7-1/2HP and...