Used Tanks & Kettles in Bremen, Germany

3500 liter heat-/coolable tank, Aisi 316

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil remarks: Feet originally stood on load cells, these are no longer available (see pictures); according to the type pla...

750 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the...

850 liter insulated tank, Aisi 304

remarks: Smaller dents in the insulation jacket; 2 hand holes with a diameter of approx. 175 mm each and 1 elongated sheet metal cutout in the lid (see photos)

5320 Liter pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 415 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...

28100 liter storage tank, Aisi 316

• Manufacturer: Bertsch

max. allowable working temperature: 100 °C Technical documentation: drawing,various documents ,certificate of inspection remarks: Tank with dents in the cylinder (vacuum damage; see photos); cylinder manhole diam...

1100 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: former support brackets were cut off by dismantling and are not available anymore; 1 heating connection cut...

11100 liter storage tank, AISI316

• Manufacturer: Gross Apparatebau

remarks: Built according to DIN6618; pipelines inside the tanks; stand frame, 1.4301 (Aisi 304); manhole cover, 1.4541 (Aisi 304); Outlet with screwed reduction

200 liter heat-/coolable tank, Aisi 304

• Manufacturer: F. Widmann & Sohn

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working temperature (dj): 151 °C Temperature control cylinder (dj): double jacket temperature control bo...

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

30000 liter heat-/coolable tank, Aisi 304

max. allowable working temperature: 70 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 160 °C notice: some residues of previous content, manhole cover plated remarks:...

100 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): half-coil agitator features: agitator shaft made of mild steel; 1 dent in the fan guard of the motor

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

300 liter mobile tank, Aisi 304

remarks: 1 strong dent in the upper cylinder area and 1 kink in the outlet pipe (see photos)