Semiconductors » Surface Treatment / Cleaning » Spin Rinse Dryers (SRD) » Gyeonggi-do

Search By Manufacturer

Building Filters

7

Used Spin Rinse Dryers (Srd) in Gyeonggi-do, South Korea

  • Semitool 480S SRD

    Semitool 480S SRD

    • Manufacturer: Semitool
    • Model: SRD-480S

    8"/200mm Wafer Capable, Single Stack SRD on Rollcart, PSC-101 Controller

    Yongin-si, South Korea
  • no-image_en.png

    SEMITOOL ST 470

    • Manufacturer: Semitool
    • Model: ST-470

    Yongin-si, South Korea
  • no-image_en.png

    Semitool SRD-270F

    • Manufacturer: Semitool
    • Model: SRD-270F

    Spin dryer

    Yongin-si, South Korea
  • no-image_en.png

    SEMITOOL ST"470S/L

    • Manufacturer: Semitool
    • Model: ST-470

    SPIN DRYER Wafer size: 6

    Yongin-si, South Korea
  • no-image_en.png

    Semitool 870S SRD

    • Manufacturer: Semitool
    • Model: SRD-870S

    6"/150mm Wafer Capable, PSC-102 Controllers, Single Bolt Rotor Design

    Yongin-si, South Korea
  • no-image_en.png

    Semitool 880S SRD

    • Manufacturer: Semitool
    • Model: SRD-880S

    Semitool 880S Dual Stack SRD Wafer size: 200mm | Lead time: 6-8 weeks

    Yongin-si, South Korea
  • no-image_en.png

    SEMITOOL ST-470S/L

    • Manufacturer: Semitool
    • Model: ST-470

    SPIN DRYER Wafer size: 6 | Lead time: `Immediatley

    Yongin-si, South Korea

Overview

Spin Rinse Dryers (SRD) are compact, high-throughput units used to rinse and rapidly dry parts after wet cleaning. They spin parts while spraying deionized water or solvents and apply high-speed rotation plus heated or vacuum-assisted drying to remove residual fluid and particles. SRDs are common in surface treatment, semiconductor, medical, and precision manufacturing where fast, repeatable, particle-free drying is required.

FAQ

What should I inspect when buying a used SRD?

Check rotor and chuck condition, seals, bearings and motor hours. Verify control electronics, cycle recipes, rinse plumbing and drain integrity. Look for corrosion, contamination, and maintenance records. Confirm spare parts availability and compatibility with your fixtures.

How do I prepare and ship an SRD safely?

Drain all fluids, secure rotating parts, lock the rotor and protect fragile sensors. Crate the unit on a pallet, brace internal components, and mark lifting points. Use a carrier experienced with lab or industrial equipment, insure the load, and include export or hazardous-material paperwork if solvents were used.

What regular maintenance does an SRD need?

Perform routine cleaning of the chamber and nozzles, replace seals and filters, inspect bearings and motor coupling, and service vacuum or heated drying systems. Calibrate sensors and cycle controls periodically and follow the manufacturer's maintenance schedule.