Used Shearing Equipment in Germany

Bernardo HKT 3200 x 12 Hydraulic slide gate shear

• Manufacturer: Bernardo
• Model: HKT 3200
• Maximum thickness: 12 millimeter
• Shearing length: 3,200 millimeter

Description Linear movement of the knife bar and adjustable cutting angle (0.5° to 2.5°) for optimum cutting results, especially with thin sheets Simple and quick adjustment of the cutting gap by means of a handw...

ELMAG HGD 4100x13mm Hydraulic plate shears

Description Performance data HGD Cutting capacity models up to 20 mm material thickness cutting length up to 3.100 or 4.100 mm Cutting speed depending on model 8 - 16 strokes per minute High drive power, dependin...

Bernardo FBS 1000 sheet metal shears

• Manufacturer: Bernardo
• Model: FBS 1000
• Maximum thickness: 1 millimeter
• Shearing length: 940 millimeter

Description For efficient cutting of various materials Backgauge 0 - 700 mm with fine adjustment Right-angled stop with mm-scale on both sides Front tray for large-sized sheets Heavy robust cast iron construction...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Throat depth: 150 millimeter
• Maximum thickness: 10 millimeter

The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower bla...

Knuth Werkzeugmaschinen

• Manufacturer: Knuth Werkzeugmaschinen
• Throat depth: 150 millimeter
• Maximum thickness: 8 millimeter

The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower bla...

Bernardo PTS 1050 E Electrical precision plate shears

• Manufacturer: Bernardo
• Model: PTS 1050
• Maximum thickness: 1 millimeter
• Shearing length: 1,050 millimeter

Description Operation via foot pedal, hands remain free for optimal positioning of the sheet Motor-driven guillotine shears for cutting a wide range of materials, such as sheet steel, brass, aluminium, copper, .....

Bernardo FBS 1320 Foot plate shears

• Manufacturer: Bernardo
• Model: FBS 1320
• Maximum thickness: 1.25 millimeter
• Shearing length: 1,320 millimeter

Description For efficient cutting of various materials Backgauge 0 - 700 mm with fine adjustment Right-angled stop with mm-scale on both sides Front tray for large-sized sheets Heavy robust cast iron construction...

1980 Vöest BT5

• Manufacturer: Voestalpine

Cutting shears Vöest BT5 Manufacturer No .: 0-507 / 199 Motor 7PS, approx. 2880 rpm Stroke number of the knife carrier: 30 Cutting length: 2010mm Projection: 150mm Weight: 2.9T. Year of construction (estimated): ...

MUBEA BF11N

• Manufacturer: Mubea

Further technical data on request! Weight approx.: about 1000 kg

Profile steel scissors Peddinghaus Peddycut 275

• Manufacturer: Peddinghaus

Peddinghaus Peddycut 275 6-way combined profile steel shear Available immediately ex works: Peddinghaus profile steel shear Type Peddycut 275 Year of manufacture 1987 Pressure force 27 tons Table 400 x 250 mm Thr...

1980 NN/ LISSE Length cutting

• Manufacturer: NN/ LISSE

coil car decoiler coil opener/strip centering/leveller pinch roll unit leveller edge trimming shear with scrap winder looping pit equipment with carry-over table strip centering pinch roll unit with length measur...

1973 WIEGER/ THEIS ESWS 4,5/30

• Manufacturer: Wieger
• Maximum thickness: 4.5 millimeter
• Shearing length: 3,050 millimeter

hold-down device rear stop adjustment conveyor belt stacker adjustment drive

1999 EHT TSS 4-60

• Manufacturer: EHT
• Model: TSS 4-60
• Maximum thickness: 4 millimeter

cutting gap adjustment Cutting width: max. 6.050 mm | Cutting thickness: max. 4 mm | Length stop range: 10 - 1.000 mm | Design: hydraulic | Blade length: 6.100 mm | Column extension: 200 mm | Cutting angle top bl...

Durma VS 3006 / VS 3010 / VS 3013 / VS 3016 / VS 3020 / VS 4006 / VS 4013 / VS 4016 / VS 4020 / VS 6006 / VS 6013 / VS 6016 / VS 6020 / VS 6025 / VS 8010 / VS 10013

• Manufacturer: Durma - Durmazlar
• Model: VS 3006

VS Guided guillotine shear Guided guillotine shear The VS series of baffle-guided, hydraulic CNC guillotine shears is characterized by its robust machine design in monoblock construction. Easy and intuitive to op...

1987 THEIS WI 1000/600 #1052-01300

• Manufacturer: THEIS
• Maximum thickness: 3 millimeter
• Power requirement: 14 kilowatt

Accessories sheet metal stacking device on rails Control-type: conventional | Cutting dimensions max.: 600 x 1000 mm | Plate thickness: max. 3 mm | Cutting angle: 1,5 ° | Side stop electrical adjustable: 0 - 1010...

ESPE/Piesok CNTA 3150/16 Shearing Equipment

• Manufacturer: ESPE/Piesok
• Model: CNTA 3150/16

Good condition ESPE/Piesok CNTA 3150/16 Shearing Equipment available between 1986 and 1991 years. Located in Slovakia and other countries. Click request price for more information.