Used Saws in Tennessee, USA

Rockwell Band Saw

• Manufacturer: Rockwell

Rockwell - Band Saw - Serial# 89280 VOLTS 110-220, 60HZ, AMP 14.7, RPM 1720, Phase 1 No equipment available to assist with loading buyer will need to bring with them. ****Note: Bidders are encouraged to inspect i...

RazorGage RazorOptimal Cyclone Optimizing Saw System

Optimizing Saw System The RazorGage RazorOptimal is a programmable optimizing saw system designed to make your manufacturing process faster, more accurate, and more efficient. This powerful automated industrial s...

Laguna P14|10 Panel Saw

• Manufacturer: Laguna

The sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly. ...

RazorGage RazorOptimal Pocket Hole Optimizing Saw System

Optimizing Saw System With Pocket Hole Boring And Face Frame Scribing Defect, optimize, cut to length, drill pocket holes, scribe face frame layout marks, and inkjet print labels directly on the part, on one mach...

Northtech NT HBR-250A-2 Dual-blade Horizontal Resaw Band Saw

This 250 series 20 HP (x2) dual-blade resaw from Northtech can easily handle material up to 11-3/4″ (W)” x 8″ (H). The 1″ (W) x 28″ (Dia.) wheels will securely drive both 1″ and 1-1/4″ blades. The feed conveyor i...

Northtech NT ADS-100A Automatic Crayon Mark & Defect Saw

With feed speeds up to 240 FPM and up to 80 highly accurate cuts per minute, the NT ADS-100A processes up to 3-5 times more material than manual cut-off saws. The precision computer-controlled servo consistently ...

Band Saw

• Manufacturer: RHEEM

Old band saw, non-working ITEMS WILL BE SOLD AS A LOT AND WINNING BIDDER MUST TAKE ALL ITEMS. ITEMS SOLD "AS IS, WHERE IS"

Northfield No. 4 – 16″ Table Saw

This is a fully functional Northfield No. 4 table saw. This saw has a 16″ blade capacity and with a Freud blade it looks to have slightly under 3-7/8″ of capacity. You will find a clean 52″ Biesemeyer fence. a 44...

Victory 15″ Radial Arm Saw

This is a rather rare saw made by “Victory Motors Inc. during World War II based on a DeWalt design. With that said this is a pretty cool radial and a part of woodworking history. 5hp 230/460V/3-Phase. 1″ arbor ...

RazorGage Cyclone 600 Upcut Saw

INDUSTRIAL UPCUT SAW The Cyclone 600 Upcut Saw from RazorGage is one of the safest, most rugged, and precise upcut saws on the market. This industrial upcut saw provides razor-sharp cuts 20 inches wide with virtu...

Safety Speed Cut 7400 Panel Saw (5hp)

Not much to say about this Safety Speed Cut 7400 Panel Saw as it functions as it should. It does have a small parts shelf and 8′ fences on both sides. It’s also has the largest motor offered which is 5 hp. Full s...

Northtech NT 600A Vertical Band Saw

The Northtech NT 600A Vertical Bandsaw has a 7.5 HP motor, 2” x 208″ blade, and a maximum cut thickness of 13-12″. The 23-3/4” x 26” cast iron worktable is tiltable up to 60 degrees and features a 3-3/4” x 18” fe...

Whirlwind 212R 18″ Upcut Saw

• Manufacturer: Whirlwind

This is a very clean system from a smaller shop. This Whirlwind is Right Handed and powered by a 10 hp Baldor 208-230/460V/3-Phase motor with an 18″ blade capacity. 1″ diameter saw arbor, Overhead safety guard/ho...

Pistorius SC-12 Automatic Single Cutoff Saw

• Manufacturer: Pistorius

Pistorius Model SC-12-P automatic single cut off/miter chop saw (45 degree). 3 hp, Baldor 208-230/460V/3-Phase motor. Belt drive to saw arbor. 12″ blade capacity. Swivel saw head for miter cutting up to 45 degree...

Laguna P12|5 Panel Saw

• Manufacturer: Laguna

The P12|5 was designed as a more compact version of our popular P12|8 and P12|10 panelsaws. The P12|5 features a 63″ sliding table design, 5HP main motor, 3/4 HP scoring motor and has a swing-away overhead guard....