Used Saws in North Brabant, Netherlands

Band-Saw Machine George CY-275A -CE

Universal band saw with automatic shut off after cutting Capacity : round 225mm 90degrees mitre in 45 and 60 degrees 2 speeds - 45/90 m/min - hydr. cylinder for cutting pressure regulation Automatic shut off Avai...

Band-Saw Machine George CY-350A CE

Universal band saw machine CY-350A 400V CE - Cutting capacity Round 0° 270 mm Standard Accessories : Cutting capacity Square 0° 260 mm Cooling pump Cutting capacity Rectangular 0° 240×370 mm Hydraulic pocket cyli...

Band-Saw Machine George CY-350RN CE

Universal band saw machine CY-350RN 400V CE - Cutting capacity Round 0° 270 mm Standard Accessories : Cutting capacity Square 0° 260 mm Cooling pump Cutting capacity Rectangular 0° 260×370 mm Hydraulic pocket cyl...

Band-Saw Machine George CY-275AV -CE

Universal band saw with automatic shut-off after cutting and variable speed Capacity : round 225mm 90degrees mitre in 45 and 60 degrees Variable speed from 20-90 m/min - hydraulic cylinder for sawing pressure reg...

Band-Saw Machine George CY-270N 400V CE

Universal band saw machine George CY-270N 400V CE Capacity straight round 225mm square 190mm rectangular 190x150mm mitre 0 - 45 - 60 degrees Revolutions 45/90 m/min 1,5 HP / 1,1 kW Saw band 2480x27x0.9mm Weight :...

Band-Saw Machine George CY-280N 400V CE

Universal band saw machine George CY-280N 400V CE Capacity straight round 225mm square 180 rectangular 245x150mm mitre 0 - 45 - 60- -45 degrees Revolutions 20/90 m/min vario speed inverter 1,5 HP / 1,1 kW Saw ban...

Gray ZS 85 (N)

• Model: ZS85N

• For cutting profiles with a horizontal and vertical mitre • Saw blade diameter: 300 mm • Maximum cutting height at 90°: 85 mm • Maximum cutting width at 90°: 380 mm • Horizontally swivel saw unit: 45°, 90° and ...

Macc NEW 315

• Manufacturer: Macc

• Saw blade diameter: 315 mm • Miter cutting from -45° to +45° • 2-speed saw blade: 40 x 80 rpm • Clamp opening: 190 mm • Cutting capacity: – Rectangle: 140 x 70 mm – Round: 65 mm – Square: 90 mm

Mecal SW 400 M

• Downward manual saw movement • Saw blade diameter 400 mm • Cutting angles: from -45° to +45° • With 2 pneumatic clamps • Pneumatic lubrication of the saw blade

Tronzadoras TL 600 A

• Automatic saw movement with two-hand operation • Rising saw blade diameter 600 mm • Cutting angles: from -22.5° to +22.5° • With 2 vertical and 2 horizontal pneumatic clamps • Pneumatic lubrication of the saw b...

Macc NTS 315

• Manufacturer: Macc

• Saw blade diameter: 315 mm • Miter cutting from -60° to +45° • 2-speed saw blade: 33 x 66 rpm • Clamp opening: 160 mm • Cutting capacity: – Rectangle: 135 x 80 mm – Round: 70 mm – Square: 90 mm

Pressta Profilma 501E

• Motor power: 7.5 kW • Saw blade diameter: 550 mm • Speed: 2,850 rpm • Maximum cutting height at 90º: 150 mm • Maximum cutting width at 90º: 270 mm • Equipped with microdosing system • Operation by means of two-...

Pressta Profilma 400V

• Motor power: 12.0 kW (optional 18.0 kW) • Saw blade diameter: 400 mm • Speed: 2,500 rpm • Maximum cutting height at 90º: 120 mm • Maximum cutting width at 90º: 200 mm • Equipped with microdosing system • Operat...

Mecal SW 553 Argus

• Manufacturer: Argus

• Saw blade diameter: 550 mm • Pneumatic positioning of saw angles: from -22.5º to 90º • Maximum saw length: 4,000 – 5,000 – 6,000 mm • Minimum saw length: 350 mm • Saw blade cooling by means of microdosing syste...

Mecal FE 400 Inox Vico-3

• Saw blade diameter: 400 mm • Servo-controlled positioning of saw angles: from -45º to +45º • Minimum/maximum saw length: 0/5,200 mm • Saw blade cooling by means of microdosing system and water emulsion cooling ...