Used Saws in Saitama, Japan

SYNKS SPN1

• Manufacturer: Thinks

No.1 in Japan in terms of installation rate. Linear guide rails are used for the lifting and lowering rails to achieve more precise cutting processing. 2. standard ruled line setting changed from manual to automa...

Matsui Ironworks KM-101 with 5-minute blade

• Manufacturer: Matsui Ironworks

-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...

Matsui Ironworks KM-101 with 3-minute blade

• Manufacturer: Matsui Ironworks

-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...

Matsui Ironworks VC-300

• Manufacturer: Matsui Ironworks

Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...

Matsui Ironworks HP-603

• Manufacturer: Matsui Ironworks

-Blade height can be adjusted by either the blade gauge type for easy adjustment or the set screw type for more precise adjustment. Set screw type for more precise adjustment is available.

Matsui Ironworks VC-350

• Manufacturer: Matsui Ironworks

Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...

Matsui Ironworks VCR-3

• Manufacturer: Matsui Ironworks

Power supply: Single phase 100V | Current: 15A | Power consumption: 1,430W | Mass: 10.5kg | Oil tank capacity: 65ml: 5m | Chain speed: 10.2 m/s (440 m/min) | Effective length of cut: 360mm

Matsui Ironworks VC-100

• Manufacturer: Matsui Ironworks

Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...

Makita JR002GRDX

• Manufacturer: Makita

Ironworker cutting speed Increased by approx. 50 *Compared to our conventional machine Steel pipe (Φ34×3mm thickness) Battery BL4025 x 2, Charger DC40RA, Case, Reciprocating saw blade (BIM48/steelworker)

1999 Amada HFA400CNC

• Manufacturer: Amada
• Model: HFA-400CNC

Product name: Band saw | Main specifications: Under maintenance. | Remarks: Under maintenance.

2020 Daito GAⅣ260

• Manufacturer: Daito
• Model: GA260

Product name: Band saw | Main specifications: Cutting capacity: Φ260, □300×260

TUS-14

The main shaft (the left-hand surface plate, viewed from the cross-cutting axis) is equipped with a W-axis that can be used as a lifting table. Because it can also be used as a lifting table, a vertical saw can b...

1971 Amada V-400

• Manufacturer: Amada
• Model: V-400

Product name: Contour machine | Main specifications: Saw blade speed: 15-90m/m, Saw blade size: 3380-3578, Adjustment amount: 80, Motor saw 1.5Kw, Grinder 0.75kW, SN: 192559

Makita LS008GZ

• Manufacturer: Makita

Cutting speed is approximately 2.5 times faster Cutting 312mm wide x 62mm high in one shot Saw blade 190mm for cutting 1 inch Shark skin chip saw (A-74354), dust bag, triangular ruler, vertical vise, hex wrench (...

Makita 2703

• Manufacturer: Makita

Ideal for cutting materials of fixed dimensions! Electric motor: Direct-wound commutator motor | Voltage: Single-phase AC 100V | Current: 15A | Frequency: 50/60 Hz | Power consumption: 1,430W | Rotation speed: 4,...