- Trusted Seller
Lincoln LAC-B2 Lincolnweld 5/32" SAW Submerged Arc Welding Wire 630lb (2) Drums
- Manufacturer: Lincoln
New Surplus. Lot of 2 Partial Barrels. (1) 500 Lb (1) 130 Lb - 630 Lb Total 5/32" Submerged Arc Welding Wire. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,440 USDMillersburg, IN - Trusted Seller
Delta Rockwell Vintage Radial Arm Saw 12" Blade 3Hp Motor 20" Rip 230/460V 3Ph
- Manufacturer: Rockwell
Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor No all adjustments are free. Main ones are. If this item ships...
$1,000 USDMillersburg, IN - Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...
$1,800 USDMillersburg, IN - Trusted Seller
CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...
$1,080 USDMillersburg, IN - Trusted Seller
CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail
- Manufacturer: CTD Machine
Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...
$4,250 USDMillersburg, IN - Trusted Seller
LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph
- Manufacturer: LeTarte
Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,620 USDMillersburg, IN - Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...
$1,800 USDMillersburg, IN - Trusted Seller
Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche
- Manufacturer: Sampson
Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...
$1,425 USDMillersburg, IN - Auction
Fort Wayne, INVisit Auction Website - Trusted SellerAuction
Seymour, INVisit Auction Website - Trusted SellerAuction
Seymour, INVisit Auction Website - Trusted Seller
Delta Rockwell 28-350 Vertical Bandsaw 20" Wheel 1Hp 230/460V 3Ph Metal Wood
- Manufacturer: Rockwell
- Model: 28-350
Used, in Good Working Condition. Wired for 480V 1Hp 3Ph motor. Older unit. May need a tune-up Top is 20x24" If this item ships as Flat Rate Freight please see details in Shipping tab
$1,500 USDMillersburg, IN Proseals Digital
📍 Available in London, Kentucky — through Trustworthy Equipment LLC 🔥 ProStop Version 3 – 10′ Digital Readout Fence by ProSeale 🔥 Achieve pinpoint accuracy and lightning‑fast setups with the ProStop Version 3 dig...
Kingman, IN- Trusted Seller
Doall C58 Horizontal Metal Band Saw 12" X 18" 550v 3ph Vise Table Feed Parts
- Manufacturer: DoAll
- Model: C-58
Parts only. 550 volt 3 phase Selling as parts only. Good repair guy could get this going as most functions work. We are cutting our losses and ready to move on. Has vise table to feed the band saw. Not a miter sa...
$1,500 USDMillersburg, IN 
Marvel 800A-PC3S-60 Vertical Tilt Frame Saw, 31.25" x 37.5"
- Manufacturer: Marvel
- Model: 800A-PC3S-60
Capacity Rectangles Rounds - Nominal 31.25" x 37.5" (794 mm x 952 mm) 31.25" (794 mm) - Blade at 45 o - Right 31.25" x 25.5" (794 mm x 648 mm) 25.5" (648 mm) - Blade at 45 o - Left 31.25" x 24.75" (794 mm x 62...
Tip: Enter manufacturer, model or keyword
