Used Saws in Poland

Band saw Euro TSC SPH505R for aerated concrete / ceramic blocks

• Manufacturer: EuroTSC

Band saw for ceramic blocks or aerated concrete blocks move block manually for aerated concrete blocks cut or use the crank for ceramic bricks. Diamond band for fireproof hard materials is also available! Powe...

Ohler metal cutting saw

Model 660 Cutting parameters 200 x 250 mm Diameter of the disc from 610 to 710 mm, currently the dial is 670 mm

Saw - horizontal milling machine

The saw can work as a milling machine Diameter of the disc 240 mm Engine 1.5 KW 2820 rpm Pneumatic material pressure Transport dimensions - length 100 cm - 90 cm wide - height 140 cm Height from the floor to the ...

Circular saw for cutting metal

The diameter of the blade is 450 mm Cutting height 150 mm The cutting angle can be set 7.5 kw engine Transport dimensions 80 x 140 x 145 cm height

Metal cutting saw, horizontal

Mechanical material compression Cutting length approx. 20 cm Motor 0.55 KW, 1400 rpm Shipping dimensions - width 125 cm - depth 48 cm - height110 cm

Circular saw for cutting metal Kaltenbach SKL 350

• Manufacturer: Kaltenbach
• Model: SKL-350

Circular saw Kaltenbach SKL 350 The diameter of the disc is 350 mm The possibility of cutting at different angles Cutting diameter 120 mm Rotational speed of the disc 1250/2500 U / min dimensions - 1.2 m long - w...

1965 Vertical band saw SgMB400

Walter WD 425/600 KBA single-shaft multi-saw - 52 kW

WD 425 single-shaft multi-saw is used for cutting boards and slats from prisms, and can also serve as a board edger. Stable and durable construction of the machine allows for many years of trouble-free operation....

Shark 310ax band saw

BAND SAW FORTE 420

• Manufacturer: Forte

Torsion vise Coolant pump Hydraulically lowered arm Coolant pump

BAND SAW BIANCO MOD270

Automatic raising and lowering of the arm Hydraulic vise clamp Pivoting arm Machine fully operational, in very good condition

Articulated circular saw 14

Diameter of the blade 420 mm Engine about 3 KW Circular saw

Mihoma articulated saw 23

• Manufacturer: Mihoma

VEB Mihoma articulated saw Blade diameter 450 mm 60 cm extension Engine about 4 KW

Cross-cut saw 4

The diameter of the disc is 350 mm Extend to 75 cm Rotation of the dial is possible 2.2 KW engine, 2860 rpm Saw to watch in our company after an earlier appointment, please

PRVOMAJSKA BAND SAW HAP280 AUTOMATIC

• Manufacturer: Prvomajska

Possibility to work in automatic Maximum cutting diameter: 280mm | Total power: approximately 4 kW | Tape dimensions: 3660x25x0,9mm | Weight: approximately 1500kg | Dimensions (length / width / height): 2000mm / ...