Used Saws in Germany

Trusted Seller
MEP VELOCEX 100
- Manufacturer: MEP
- Model: Velocex 100
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Rest piece length: 100/90mm | Dimensions of saw blade: 360x2.6x2.25x40mm | Speed: 50-200m/min | Engine output: 15kW | Work heigh...
Günzburg, Germany
Trusted Seller
MEP Shark 281 SXI EVO
- Manufacturer: MEP
- Model: Shark 281
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
Günzburg, Germany
Trusted Seller
MEP SHARK 332-1 NC 5.0
- Manufacturer: MEP
- Model: Shark 332
- Power requirement: 2.2 kilowatt
Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with...
Günzburg, Germany
Trusted Seller
1990 EISELE PSU-HYDR 470
- Manufacturer: Eisele
- Model: PSU 470
Control: NC - | Storage location: Günzburg | Capacidad de desperdicio: at short notice - by arrangement. | Freight basis: Delivery ex warehouse Günzburg | Saw blade diameter: mm | Cutting diameter: mm | Stroke: ...
Günzburg, Germany
Trusted Seller
MEBA MEBAbase 24 DG
- Manufacturer: Meba
Control: conventional - | Storage location: Factory | Freight basis: Delivery ex works. | Dimensions of saw-band: 2910 x 27 x 0,9mm | Capacity 90 degrees round: 240mm | Capacity 90 degrees flat: 310 x 240mm | Re...
Günzburg, Germany
Trusted Seller
2007 KALTENBACH SKL 450 NA
- Manufacturer: Kaltenbach
- Model: SKL-450
This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneat...
Germany
Trusted Seller
1986 FORTE BA 251
- Manufacturer: Forte
- Model: BA 251
Add-ons Well-maintained automatic band saw Accessories Complete electrical system, hydraulic system, coolant system, quantity pre-selection, additional saw blade guide, chip brush
Wiesbaden, Germany
Trusted Seller
ZIMMER Z252/DG
- Manufacturer: Zimmer
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Capacity 90 degrees round: 240mm | Capacity 90 degrees square: 240 x 240mm | Capacity 90 degrees flat: 165 x 210mm | Capacity 60...
Günzburg, Germany
Trusted Seller
1962 MÖSSNER REKORD SM 400
- Manufacturer: Mössner - Rekord
- Model: SM 400
Control: capacidad de aguas grises | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Roll diameter: 400mm | Saw band length: 2980mm | Throat: 390mm | Workpiece height: 240mm | Table ...
Günzburg, Germany
Trusted Seller
MEP TIGER 352
- Manufacturer: MEP
- Model: Tiger 352
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Saw blade diameter: 350 x 32 x 2,5mm | Vice: 190mm | Capacity 90 degrees round: 115mm | Capacity 90 degrees square: 95mm | Capac...
Günzburg, Germany
Trusted Seller
ZIMMER Z 125/R
- Manufacturer: Zimmer
- Model: Z125/R
Domestic equipments: - Stepless speed regulation - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop
Günzburg, Germany
Trusted Seller
1984 MÖSSNER REKORD SSF 1050
- Manufacturer: Mössner - Rekord
- Model: SSF 1050
Additional Information Lightly used and very well-maintained high-performance vertical band saw, available in two different throat sizes. Accessories Various accessories, operating instructions
Wiesbaden, Germany
Trusted Seller
MEP VELOCEX 175
- Manufacturer: MEP
- Model: Velocex 175
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Longitud: 100/120mm | Dimensions of saw blade: 560x3x2.5x50mm | Speed: 50-200m/min | Engine output: 30kW | Work height max.: 900...
Günzburg, Germany
Trusted Seller
BERG & SCHMID VELOX 350
- Manufacturer: Berg & Schmid
- Model: VELOX 350
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Capacity 90 degrees round: 120mm | Capacity 90 degrees square: 105mm | Capacity 90 degrees flat: 200x80mm | ...
Günzburg, Germany
Trusted Seller
2007 MEP SHARK 330 NC eco
- Manufacturer: MEP
- Model: Shark 330
This MEP SHARK 330 NC eco was manufactured in 2007. A robust metal band saw, it features a maximum vise opening of 335 mm and can handle round materials up to 300 mm, square materials up to 250 mm, and flat mater...
Germany
Kaltenbach TL 350 Saw
- Manufacturer: Kaltenbach
- Model: TL 350
Good condition Kaltenbach TL 350 Saws manufactured in 2001. Located in Germany and other countries. Click request price for more information.
Germany