Used Punch Presses

Bliss C22 OBI Punch Press

• Manufacturer: Bliss
• Model: C-22

Imperial Metric Bliss C22 OBI Punch Press 22 Ton Capacity Stroke 2.5” Shut Height 9.25” Ram Adjustment 2.5” Throat 7.5” Opening Thru Frame 12” Bed Area 23.5” X 14” Hole Thru Bed 12” X 9” Hole Thru Bed 10” Diamete...

1998 70 ton Rousselle Model B1-70 OBI Punch Press ()

• Manufacturer: Rousselle
• Capacity: 70,000 kilogram
• Stroke length: 76.19999999999999 millimeter

Imperial Metric Rousselle Model B1-70 70 Ton OBI Punch Press Equipped With: Air Clutch Air Brake Air Counter Balance Dual Palm Button Controls

Alva Allen 5 Ton Capacity OBI Press

• Manufacturer: Allen

Alva Allen 5-Ton Capacity OBI Press, S/N 85-304

PIERCE-ALL 3025A #0847923

• Manufacturer: Pierce
• Model: 3025A
• Capacity: 25,000 kilogram
• Throat depth: 762 millimeter

Capacity: 25 TONS | Throat: 30" | Stroke: 3/8" | Strokes per minute: 140 | Area of table: 36" X 96" | Area of side gauge table: 36" X 48" | Max hole diameter: 5" | Maximum material thickness: 5" | Side gauge: YE...

STRIPPIT 18/30 #1271823

• Manufacturer: LVD - Strippit
• Throat depth: 457.2 millimeter

397103169 240/480 3 PHASE Maximum punching capaicty: 30 TONS | Material size: 18" X 30" | Usable throat depth: 18" | Stroke: 5/8" | Stock thickness: 1/4" MAXIMUM | Strokes per minute: 165 | Tooling: YES

L&J m# 5 50 Ton Capacity Back Geared OBI Press

• Manufacturer: L&J

L&J m# 5 50-Ton Capacity Back Geared OBI Press, 3" Stroke, 11" Shut Height, S/N 51736, w/ Light Curtains, trim tool not included

V&O m# 25ST 25 Ton Capacity OBI Flywheel Press

• Manufacturer: V&O

V&O m# 25ST 25 Ton Capacity OBI Flywheel Press, 2" Stroke, 11" Shut Height, Ram Adjustment: 2-1/2″, Bed Size: 24″ x 13″, Ram Size: 10″ x 7″, Throat: 7″, Opening Thru Back: 11″, Speeds: 200 – 600, S/N 25ST-102 w/ ...

Denison Multipress Electric Over Hydraulic Press 8 Ton 12" Stroke 230V

• Manufacturer: Denison
• Stroke length: 304.79999999999995 millimeter

Throat Opening (Frame to Center of Ram) (Inches): 7" Used, in Good Working Condition, Tested OK. Tested in our shop. Wired for 230V 3 phase Hand control. 120V 20 Wide x 15" Deep bed plate with a 4" x 4" opening....

Press-Rite 20 Ton Punch Press

Hydraulic Press 20 Ton H Frame 120V Powered Pump Double Acting Cylinder

Used, in Good Working Condition. Look like it had light use. Very good condition. Rated for 1500 PSI. 20 ton 6" bore x 1500 psi = 42411 lbs of force 43" max vertical daylight. 15-3/4" stroke double acting cylinde...

Hydraulic Press 20 Ton H Frame 120V Powered Pump Double Acting Cylinder

Used, in Good Working Condition. Look like it had light use. Very good condition. Rated for 1500 PSI. 20 ton 6" bore x 1500 psi = 42411 lbs of force 43" max vertical daylight. 15-3/4" stroke double acting cylinde...

Whitney Jensen 10 Ton Punch Press

• Manufacturer: Jensen

Whitney Jensen 10 Ton Punch Press Throat Dept- 18″ Stroke- 1 1/4″ Shut Height- Ram Down- Adjustment Up- 6 1/8″ Wired 230/460 3ph

Custom Hydraulic Press 12000lbs 6 Ton 18" Stroke Auto Return PLC Controls 3Ph

Used, in Good Working Condition, Tested. This is a custom hydraulic powered press. 18" stroke. Max width of material is 21". 3" lowered and 21" raised. 24x24" base. Hydraulic power unit is a 1000 psi unit with 2...