Used Punch Presses

90 Ton South Bend Johnson OBI Press 26020J

• Manufacturer: South Bend
• Model: 90

MODEL: 90 SERIAL #: 67235 6" STROKE 13.5" SHUT HEIGHT 4" RAM ADJUSTMENT 44 SPM 42" x 27" BED 4" DRILLED & TAPPED BOLSTER AIR CLUTCH & BRAKE LIGHT CURTAINS GOOD CONDITION 121" T

75 TON DANLY FLYWHEEL STYLE OBI PRESS 18004E

• Manufacturer: DANLY

MODEL #: NO 75 SERIAL #: 755976-14-76 8" STROKE 21" SHUT HEIGHT 3" RAM ADJUSTMENT 40-80 SPM 36" x 24" BED 24" x 18" RAM AIR CLUTCH & BRAKE AIR COUNTERBALANCES PALM BUTTONS 70" LR x 101" FB x 165" TALL 17,000 LB...

12 TON TISHKEN 2 POST CUT OFF PRESS 15041E

• Manufacturer: Tishken

MODEL #: N/A SERIAL #: N/A 12 TONS MAXIMUM CAPACITY 1-1/2" STROKE 7-3/4" SHUT HEIGHT FLYING DIE AIR CLUTCH & BRAKE 8-3/4" DISTANCE BETWEEN POSTS ADJUSTABLE BASE MOTOR: 3 HP 220/440/60/3 50" LR x 41" FB x 46"...

25 TON SAMCO 4 POST MECHANICAL CUT OFF PRESS. #0313723

• Manufacturer: Samco
• Capacity: 25,000 kilogram
• Stroke length: 50.8 millimeter

REBUILT BY SAMCO Capacity: 25 TON | Stroke: 2" | Die height: 13-1/2" | Distanve between post left to right: 31" | Distance betwee post front to back: 13" | Strokes per minute: 100 | Area of bed plate: 46" X 26" |...

30 TON BRUDERER 3 POST HIGH SPEED PRESS 10064L

• Manufacturer: Bruderer
• Model: BSTA 30

MODEL: BSTA30 .629"-1.57" ADJUSTABLE STROKE 7.5" SHUT HEIGHT (ESTIMATED OVER THE SUB BOLSTER) 21.5" x 18.375" x 2.375" BOLSTER 12" BETWEEN TIE BARS x 18.375" x 1.75" SUB BOLSTER 6" x 2" OPENING 21.5" x 18.375" R...

60 TON MINSTER FLYWHEEL TYPE OBI PRESS 15087C

• Manufacturer: Minster

MODEL #: #6 SERIAL #: 6-16736 7" STROKE 18" SHUT HEIGHT 3" RAM ADJUSTMENT 50 - 100 SPM 32" x 21" BED 21" x 12" RAM 3" T SLOTTED BOLSTER AIR CLUTCH & BRAKE 15" DISTANCE BETWEEN SIDE FRAMES YEAR: 1966 PALM BUTTO...

L & J No 2 Mechanical Punch Press OBI 18 Ton 2.5" Stroke 18x11.5" Bed 6.5 Throat

• Manufacturer: L&J
• Model: NO 2
• Stroke length: 2.5 millimeter

Ram Bolt Distance (Center to Center) (Inches): 7 Throat Opening (Frame to Center of Ram) (Inches): 6.5 Used, in Good Working Condition, Tested Nice clean older unit. Ready for work. Has hand and foot controls. If...

Di-Acro Turret Punch No. 12, Hand Turret Punch Press 12 Station

• Manufacturer: Di-Acro

In good working condition This unit comes with the following punch sizes, 11/32", 1/4", 1/8", 9/32", 3/8", 13/32", 7/16", 15/32", 1/2", 3/4", 1", 3/16". 12 Station On a nice stand Contact us for a freight quote o...

4 Ton BTM Air Powered Toggle Presses (4) z20058b

• Manufacturer: BTM

4 Ton BTM Air Powered Toggle Presses (4) Model #P-4-HX10-TE21.5 Serial #885500PA #885500PA #8988 #8988 Age 1996 - 1998 Stroke 10” Ram plate 4 Ton BTM Air Powered Toggle Presses (4) ...

EUROMAC MTX INDEX 33 Ton CNC Turret Punch Press – High-Precision Sheet

• Manufacturer: Euromac
• Capacity: 33,000 kilogram

“Used, in nice condition. This punch press was in working condition when taken out of service. Was just disconnected in December 2024. ” EUROMAC MTX INDEX 33 Ton CNC Turret Punch Press – High-Precision Sheet EURO...

PA Servo Feed Punch Press Metal Feeder 16" Wide Stock Feed Edge Electro Craft

• Manufacturer: ElectroCraft

Used, in Good Working Condition. Removed From a Working Environment. Max width 16" Allen Bradley servo motor F-4075-R-H00AA Edge control panel. Drive SRF-200 9186-0003 BSA-30X Working pull. If this item ships as...

Rapid Air 104CJ Servo Feed Punch Press Metal Feeder 4" Wide Kollmorgen Goldline

• Manufacturer: RapidAir

Used, in Good Working Condition. Removed From a Working Environment. Max thickness .070" Max width 4" Kollmorgen Goldline MT306A1-R6C1-002 servo motor One connector is broken. We do not have a controller to fully...

Press Rite 5 Ton Capacity Flywheel Punch Press

Press Rite 5-Ton Capacity Flywheel Punch Press, S/N 8329