Used Processing in Mexico

F&P Coil Processing Equipment in Mexico

• Manufacturer: Floreani & Partners

Coil Inspection Lines Coil Slitting Lines Cut To Length Lines Multi-Blanking Lines Slit Coil Packaging Lines Surface Finishing Lines . . . Buy/Sell Design Manufacture Revamp & Automate Relocate -

F&P Coil Processing Equipment in Mexico

• Manufacturer: Floreani & Partners

Coil Inspection Lines Coil Slitting Lines Cut To Length Lines Multi-Blanking Lines Slit Coil Packaging Lines Surface Finishing Lines . . . Buy/Sell Design Manufacture Revamp & Automate Relocate -

Carbon Steel Kettle dolly

• Manufacturer: NO NAME

Carbon Steel Kettle dolly -With stainless steel kettle -20” diameter x 16” deep kettle

Fitzpatrick model C-8540 stainless steel chilsonator

• Manufacturer: Fitzpatrick

Fitzpatrick model C-8540 stainless steel chilsonator -8" diameter x 1 1/2" long rolls -With hydraulic pump -Variable speed -Mounted on base with wheels -3 HP, 3 phase, 60 cycles 460 volts motor

Stainless steel semiautomatic bottle cleaner

Stainless steel semiautomatic bottle cleaner - 2 nozzles - Different bottles size, no adjustments needed - Air operated

Stainless steel model UV-2ESP Mobile filtration mobile

Stainless steel model UV-2ESP Mobile filtration mobile -16" long x 16" width x 16" height filter -1/4 HP, 1 Phase, 60 cycles, 110 volts motor

Vac-U-Max Powder Transfer

• Manufacturer: VAC-U-MAX

Vac-U-Max Powder Transfer - 1 ½" inlet - 4" discharge diameter - With vacuum pump (recirculating water) - 7.5 HP, 3 phase, 60 cycles, 230-460 volts motor

Carbon steel extractor

Carbon steel extractor -Inlet = 6” -outlet = 6” -1.5 HP, 3 Phase, 60 Hz, 220 volt motor

Carbon steel extractor

Carbon steel extractor - Inlet = 6” - outlet = 4” - 1.5 HP, 3 Phase, 60 Hz, 220 volt

Carbon steel extractor

Carbon steel extractor -Inlet = 6” -outlet = 6” -1.5 HP, 3 Phase, 60 Hz, 220 volt motor

Savage stainless steel roller cutter

• Manufacturer: Savage

Savage stainless steel roller cutter -Manual operation -(9) 5.5" diameter blades on 1.5" centers

Sarong model SSA S6 filler and sealer suppositories

• Manufacturer: SARONG

Sarong model SSA S6 filler and sealer suppositories -Filler unit -Sealer unit -Cooling unit -knife cutter -2 HP, 3 Phases, 60 cycles, 220 volts motor - Output approx 2400/hour - This machine was reconditioned and...

Sarong model SAAS-15 Suppository Machine with Aluminum Foil

• Manufacturer: SARONG

Sarong model SAAS-15 Suppository Machine with Aluminum Foil - Forming station using aluminum foil to form the molds - (14) pistons - Heated and agitated stainless steel tank - Two rotary cooler sections - Cut-off...

Seidenader inspection table

• Manufacturer: SEIDENADER