Used Processing in Germany

nut placing device OTTO KREMMLING - type OKA NAP 1/600.

• Manufacturer: Otto Kremmling

Used. Groove kernel cutting machine PEHA - Type H1-04-03-600 with approx. 600 mm working widt

• Manufacturer: PEHA

The nuts are fed through the feed hopper into the slicing system by a continuously adjustable vibrator with feed channels. In the slicing system, the product is sliced into cubes using three disc knife shafts. Ou...

Almond sticks machine PEHA, Germany - type H1-04-600 with approx. 600 mm working width.

• Manufacturer: Peha

The almonds are fed into the hopper and go into the slicing system by a stepless vibrator with feeding channels. In the slicing system, the product is cut into sticks by using two knife shafts. Production capacit...

1967 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Diameter range: 0,8-2 mm | Cutting length: 1000 mm | Speed – meters/min: 80

AMETEK - VDS200Q25.2 - Various process equipment and machines - 2021

• Manufacturer: AMETEK Powervar

AMETEK VDS200Q25.2: 4 quadrant bipolar operation, output range -20 V to +80 V, output current 0 to 25 A continuous, peak current 75 A for 200 ms, bandwidth DC-150 kHz, power supply 1 phase 100/120/230 V ± 10% L/N...

1961 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Cutting length: 1000 mm | Diameter range: 0,8-2 mm | Speed – meters/min: 80

2018 Vernet-Behringer MAG EVO 420 Cutting and Drilling System Panel Processing Center

• Manufacturer: Vernet Behringer

Cutting and Drilling System Panel Machining Center CNC Control Kjellberg HiFocus 360 Power Source Automatic Turret (750 x 400 mm with limitations) Infeed Side: Zeroing Cross Conveyor NC Feed Carriage, Laterally P...

2013 Kemet Arctronics SC/R295C Kemet Arctronics - Press Machine

Ideally suited for pressing, punching or forming processes Automation and repeatable processes

2022 Trained+ Huser Micropilot FMR60 Radar Level Sensor NEW (5x)

Suitable for demanding tanks/containers with internals NEW Goods

2018 Polystat 300S SERVITEC - Laboratory Press

Massive laboratory or technical press Hydraulic system in the substructure, closed machine housing

density measuring instrument ANTON PAAR - type.DMA-45 Determination of density

• Manufacturer: Anton Paar

2x WEBER DS 88 - 17D complete original process units

• Manufacturer: Weber

Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - enlarged preheating zone - all parts unused in original packing ...

LANCO INTEGRATED - OKUMAT 160-1 - 2020 - Assembly system for keyboards

• Manufacturer: Lanco

🔧 Main technical data • Manufacturer: Lanco Integrated GmbH & Co. KG • System type: Rotary indexing table automatic assembly system • Project/Model: “Plug Viola” • Cycle rate: at least 45 cycles/min • Two-lane bo...

Insulating sleeve for SDE-tank (1.150 liter)

Other: - Height: approx. 900 mm- without hole for heating connections

Hydraulic Power Unit

Hydraulic Power Unit