Used Presses in Germany

Trusted Seller
1988 Bruderer DWP R07 25N
- Manufacturer: Bruderer
Find more here - https://www.ucymachines.com/ Contact us at - sales@ucymachines.com
Stuttgart, Germany
Trusted Seller
2020 TOX CBM 004.025.001.a.007
- Manufacturer: TOX
TOX pressotechnik CBM 004.025.001.a.007 Find more here - https://www.ucymachines.com/ Contact us at - sales@ucymachines.com
Berlin, Germany
Trusted Seller
ASUTEC separating stop
Separating stop, single-acting, damped ASUTEC ASM-160-EW-09-I-100 upper part moves approx. 9 mm downwards during operation (spring return) used, tested !
$175 USD
Zschepplin, Germany
Trusted Seller
GEPPERT mixer
Stirrer, agitator GEPPERT Type SPR 4/3,0 Material: Stainless steel Motor: MOLL-MOTOR type Y3PE-100LB4 B5 Z-UFDK 3.0 kW 1440 rpm 230 / 400 V 3AC 50 Hz 60 Hz - Operation is possible ! IP 55 New !
$1,341 USD
Zschepplin, Germany
Trusted Seller
WMW clamping drive
- Manufacturer: WMW
Clamping drive, clamping force generator, electric, WMW SgB 400 Hollow shaft: square profile 22 x 22 mm, depth: 45 mm 4x bore: Ø 8 mm, 2x bore: Ø 10 mm Motor: KR 71 z/4 0.4 kW 1380 rpm 220 / 380 V 3AC 50 Hz IP44 ...
$408 USD
Zschepplin, Germany
Trusted Seller
1990 SCHMID 51-320
- Manufacturer: Schmid
Manufacturer: SCHMID Model : 51-320 Year of Manufacture: 1990 Press Force (Total): 3200 kN (≈ 320 tons) Ring Rack Force: 1500 kN Counterforce: 550 kN Maximum Pressure: 320 bar Hydraulic Oil Capacity: 1500 ...
Ulm, Germany
Trusted Seller
1986 HYDRAP HPDZB 160
- Manufacturer: HYDRAP
Manufacturer: HYDRAP Model: HPDZB 160 Year of Manufacture: 1986 Type of Machine: Hydraulic Press Nominal Force: 178 kN Stroke Length: 500 mm Voltage: 380 V Frequency : 50 Hz Nominal Power: 17.5 kW Curren...
Nuremberg, Germany
1981 sperr & Lechner Splek SLF II A 200 S
- Manufacturer: sperr & Lechner
FNP electric folding low pressure press SLF II A 200 from year of manufacture 1981 Description: The folding low-pressure press is used to press off the fold on the spine of the book and has two pressing stations ...
Dabergotz, Germany
1991 Peter van Ginkel L-90 Motor
- Manufacturer: Van Ginkel
Motor driven lithography press Peter van Ginkel L-90 motor Year of manufacture 1991 Previous owner was the Academy of Visual Arts Leipzig Paper size 900 x 1,500 mm, Machine dimension L 2670 x W 1.400 mm wide, Wor...
Dabergotz, Germany
Hunkeler ADP 45-70
- Manufacturer: Hunkeler
Double spindle press Hunkeler ADP 45-70 Double plate pressing 45x70cm, above or below, spindle guided on both sides 380 volt for pressing the books with cardboard cover after hanging, or to be used as a smoothing...
Dabergotz, Germany
Trusted Seller
2008 Tox Pressotechnik MAG 075.222.A.001
- Manufacturer: TOX Pressotechnik
Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total...
Munich, Germany
Trusted Seller
1995 AMADA Arcade 210
- Manufacturer: Amada
- Model: ARCADE-210
Type of machine: CNC punching and nibbling machine / CNC punch nibbler
Windhagen, Germany
Perkin Elmer hydraulic Press for KBr technique
- Manufacturer: Perkin Elmer
Perkin Elmer hydraulic Press for KBr Technique , up to 20 to s o l d
$1,003 USD
Selm, Germany
Trusted Seller
CHEMNITZ manual spindle press
Machine type Manual screw press Make CHEMNITZ type mechanical Year of manufacture 1965 Country of origin Germany delivery time immediately Freight basis ex stock Technical details Pressure 20 t Stroke 230 mm Tabl...
$933 USD
Zschepplin, Germany
mechan. high-performance automatic press Dorst TPA 30
- Manufacturer: Dorst
- Model: TPA 30
Force 30 t, trigger force 30 to, top punch stroke 175 mm, top punch adjustment 115 mm, strokes per minutes 7,5-21,5 1/m, total connected load 9,5 KW
Cologne, Germany