Used Presses in Lombardy, Italy

100 TON RUSSIAN G-NECK PRESS

• Manufacturer: PRESSA DA 100 TON RUSSA A COLLO DI CIGNO

650X950 PLATE, FULLY OPEN LIGHT 400+100 IT HAS THE OVERTABLE, ADJUSTABLE STROKE FROM 10 TO 130MM AUTOMATIC LUBRICATION REPLACED ALL THE DISPENSERS AND TUBES REPLACED NEW GPA SOLENOID VALVE REPLACED NEW AIR D...

COLD PRESS ORMA

• Manufacturer: Orma

COLD PRESS ORMA 4000X1300 4 SECTORS 1000X1300 OPENING 1000 MM

CAVENAGHI RIDOLFI 300 TON PRESS #ITA4360

• Manufacturer: Cavenaghi & Ridolfi

DA1650X1200 PLANS ALL OPEN LIGHT 1150 CYLINDER STROKE 1100 DIAM 400 APPROX HP60 MAIN ENGINE REWARDS 300+ STEEL SHEET WITH 4 CYLINDERS GO DOWN QUICKLY, SLOW DOWN PRESS AND RETURN FAST LOVELY PAINT THE MACHINE WAS ...

OMCN 10 TON BRIDGE HYDRAULIC PRESS

• Manufacturer: OMCN

WITH MANUAL PUMP

4 COLUMNS PRESS DIAM. 80 #ITA3820

H 1600 ALL OPEN ON THE MOBILE PLANE 1200 PASSAGE BETWEEN COLUMNS 970X920 SIZE 1400X1150XH3000 ON THE CONTROL UNIT HANGING PUSHBOTTON HYDRAULIC INFERIOR MOBILE PLANE PRESSED HAPPENS THROUGH SCREW RECYCLING SPHERES...

ARTISAN PRESS

RUSSIAN PRESS ETC. 40/50 TON WITH PNEUMATIC FRICTION

• Manufacturer: PRESSA ECC.DA 40/50 TON RUSSA A FRIZIONE PNEUMATICA

WORKING MACHINE WITH OUR ELECTRIC SYSTEM IN THE CONSOLE, IT DOES SINGLE/PULSE/CONTINUOUS DOUBLE BUTTON PANEL WITH EMERGENCY BUTTON BALANCING CYLINDERS ON THE CLUBS, AIR RESERVE TANK DOUBLE BODY SOLENOID VALVE...

SASPOL HYDRAULIC PRESS #ITA3823

MOD. TC 50 D MATR. 1324 YEAR 2001 MOBILE PLAN 600 X 600 COLUMNS INCLUDED 4 COLUMNS DIAMETER: 80 PISTON DIAMETER: 180 ENGINE: 15 CV SIZE: 1300X1650X2780 WEIGHT: 30Q MACHINE WITH USE AND MAINTENACE BOOK

MYOS T105-TR PRESS

• Manufacturer: Mios

MIOS 10147 C-NECK PRESS Rated force: 1,050 kN Weight: 6,400 kg Rated stroke rate: 60 min. Operating air pressure: 4.3-5.5 bar Installed power: 7.5 kW Min./max. stroke: 15/140 mm Protrusion: 310 mm Min./max. table...

MILLUTENSIL PRESS MOD.MIL 143

• Manufacturer: Millutensil

MILLUTENSIL 10128 MILLUTENSIL MIL 143 MOLD TESTING PRESS Useful table length mm 1400 Useful width of table mm 1200 Max passage between columns on length mm 1540 Max passage between columns on the width mm 1300 T-...

FICEP BALANCE SCREW PRESS

• Manufacturer: Ficep

FICEP 10033 OVERHAULED SCREW PRESS (BALANCER) NOMINAL FORCE kn 10,000 mod. PVM315 Force kn 20,000 Screw diameter mm 315 Max useful energy Kgm 12,000 Slide stroke mm 500 Theoretical strokes at 1' No. 26 Vertical s...

GIGANT 60 TON C-NECK HYDRAULIC PRESS mod.GTPE

• Manufacturer: PRESSA IDRAULICA GIGANT 60 TON A COLLO DI CIGNO mod.GTPE

GIGANT 60 TON C-NECK HYDRAULIC PRESS mod.GTPE GUIDED MALLET HAMMER PLANE 800X500, DISTANCE TO THE CENTER 350, HAMMER STROKE 450 FULL OPEN LIGHT 750, ENGINE HP 10 IT GOES DOWN FAST, SLOWS DOWN, PRESSES AND COM...

HYDRAULIC PRESS/SPUNGER, APPROX. 40 TON

• Manufacturer: PRESSA/SMATAROSSATRICE IDRAULICA DA 40 TON??? CIRCA

WITH 4 COLUMNS DIAM.80 AND WITH CENTRAL CYLINDER THE UPPER MOLD HOLDER IS GUIDED BY 2 COLUMNS PASSAGE BETWEEN COLUMNS: ___ CYLINDER STROKE: _______ FULL LIGHT OPEN:________ MACHINE FULLY ENCLOSURE WITH A PAI...

HYDRAULIC PRESS/SPUNGER, APPROX. 40 TON

• Manufacturer: PRESSA/SMATAROSSATRICE IDRAULICA DA 40 TON??? CIRCA

WITH 4 COLUMNS DIAM.80 AND WITH CENTRAL CYLINDER THE UPPER MOLD HOLDER IS GUIDED BY 2 COLUMNS PASSAGE BETWEEN COLUMNS: ___ CYLINDER STROKE: _______ FULL LIGHT OPEN:________ MACHINE FULLY ENCLOSURE WITH A PAI...

HYDRAULIC PRESS OMB 63 #ITA4020

TABLE 750X700,ALL OPEN LIGHT700,POKER TOUR FULL METAL AWARDS