Used Presses in Saxony, Germany

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 17 millimeter

Manual screw press PAGUS used, tested ! Ram stroke max: 17 mm | Discharge: 140 mm | Spindle diameter: Ø 11 mm | Internal spindle thread: M6 | Removal table plunger: 44 mm | Table surface: Ø 25 mm | Tool holder in...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 50 millimeter

Manual screw press PAGUS used, tested ! Ram stroke max: 50 mm | Discharge: 60 mm | Spindle diameter: Ø 20 mm | Internal spindle thread: M12x1.0 with adapter to external thread M5 | Removal table plunger: 95 mm | ...

FUTTERS hand lever press

Hand lever press, mandrel press, rotary mandrel press FUTTERS ( LONDON ) LIMITED. No 900-0000 Table: 60 x 81 mm, tool holder: Ø 38 mm ram diameter: Ø 32 mm, tool holder: Ø 18 mm used, checked !

PAGUS hand lever press

• Manufacturer: Pagus

Hand lever press, mandrel press, rotary mandrel press PAGUS Table: 220 x 90 mm, with U-hole: Ø 30 mm, length: 45 mm Mounted table: 105 x 40 mm, height: 20 mm, with hole: Ø 14 mm, continuous ram diameter: Ø 40 mm,...

METALWAG manual screw press

Manual spindle press, Balance METALWAG YB-1 press stamp is missing ! used, checked !

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Table 1: 153 x 133 mm, bore: Ø 42 mm Groove width: 12 / 20 mm, groove depth: 24 mm Table 2: 150 x 107 mm, tool holder: ...

PAGUS manual spindle press

• Manufacturer: Pagus

motores Hub: max. 59 mm ( after removing the limiting sleeve ) | Discharge: 60 mm | Distance ( table - tool holder ): 90 mm | Dimensions ( ready for use ): 290 x 160 x 380 mm

PRESSTA EISELE corner joint press

• Manufacturer: Eisele
• Stroke length: 20 millimeter

Corner joint press PRESSTA EISELE PV 8 Backstop stroke. 100 mm with accessories ! used, tested !

BOSCH Electric press

• Manufacturer: Bosch

Electric press BOSCH 0 608 750 049 with transducer, terminal box and cable 0 608 600 001 0 608 701 014 0 608 870 347 3 607 021 015

PAGUS pressing and punching device

• Manufacturer: Pagus
• Stroke length: 45 millimeter

Pressing and punching device, hydraulic PAGUS KX12-1B used, tested !

PSP POHONY multi-disc brake

Multi-disc brake, Brake PSP POHONY ELB 6.3 24V CSN 02 6573 ( ČSN 02 6573 ) 5 clutch disks New !

ZAECKEL & ACHENBACH Hole punch

• Manufacturer: Achenbach
• Stroke length: 10 millimeter

Hole punch, hand lever hole punch ZAECKEL & ACHENBACH used, tested !

SYKON long hole punch

• Stroke length: 20 millimeter

Long hole punch, hole punch, hand lever hole punch SYKON 2859 used, tested !

ASUTEC separating stop

Separating stop, single-acting, damped ASUTEC ASM-160-EW-09-I-100 upper part moves approx. 9 mm downwards during operation (spring return) used, tested !

GEPPERT mixer

Stirrer, agitator GEPPERT Type SPR 4/3,0 Material: Stainless steel Motor: MOLL-MOTOR type Y3PE-100LB4 B5 Z-UFDK 3.0 kW 1440 rpm 230 / 400 V 3AC 50 Hz 60 Hz - Operation is possible ! IP 55 New !