Used Pillar Drills & Drill Presses in Saxony, Germany

WMW pillar drill

• Manufacturer: WMW

Column drilling machine; Column drilling machine WMW BS25 MK3 Motor: Elektromotorenwerke Thurm KR100,2/4-2 380V 3AC 50 Hz 3.7/4.95 A 1.420/2.830 rpm. tested, checked !

WMW pillar drill

• Manufacturer: WMW

grupo motopropulsor Drilling performance: 32 mm | Discharge: 320 mm | Spindle: MK 4 | Height table to drill chuck holder: 450 - 740 mm ( table in lowest position ) | Spindle speed: 63 - 1000 rpm (in 9 steps) | Fe...

ZMM METALIK pillar drill

• Manufacturer: ZMM

Column drilling machine ZMM METALIK PK 203 max. distance machined base plate - drill spindle: 1050 mm Table: 410 x 445 mm, working height: 210 - 840 mm Slot width: 18 / 31 mm, slot depth: 25 mm Machine base: 530 ...

ATLAS COPCO drilling machine

• Manufacturer: Atlas-Copco

Drilling machine ATLAS COPCO LBB 36 H060-U 8421 0408 47 Drill chuck: RÖHM SUPRA Ø 1 - 13 mm used, tested !

WMW bench drill

• Manufacturer: WMW

Bench drill WMW BT2 Motor: VEM BMREB 80 K 4-2 ( BMREB80K4-2 ) 0.8 / 1.0 kW 1410 / 2840 rpm 380 V 50 Hz IP44 used, tested !

WMW bench drill

• Manufacturer: WMW

Bench drill WMW BT2 Motor: VEM BMREB 80 K 4-2 ( BMREB80K4-2 ) 0.8 / 1.0 kW 1410 / 2840 rpm 380 V 50 Hz IP44 As good as new !

BOSCH hydraulic drill

• Manufacturer: Bosch

Hydraulic drill BOSCH Motor: 0 511 625 302 ( 0511625302 ) Tool holder: thread diameter: Ø 31.5 mm, pitch: 3.5 mm, length: 42 mm Mounting flange: 70 x 83 mm, through-thread: M12 x 1.75 with claw coupling for cooli...

Drilling machine Erlo TCA-70BV-RS

• Manufacturer: Erlo
• Drilling diameter: 70 millimeter

Drilling diameter in steel 70 Drilling diameter in steel [mm]: 70 | Tool holder: MK 5 | Speed range [1 / min]: 35 - 1238 | Table size [mm]: 1040 x 600 | Equipment / accessories: very solid machine, automatic dril...

Erlo TCA-70BV-RS pillar drill

• Manufacturer: Erlo

Drill diameter in steel [mm]: 70 Tool holder: MK 5 Speed range [1/min]: 35 - 1238 Table size [mm]: 1040 x 600 Equipment / accessories: very solid machine, automatic drill feeds, drill head electrically height-adj...

PAGUS drill rig

• Manufacturer: Pagus

Drill stand PAGUS 4x adjusting screw M12 used, tested !

PAGUS drill rig

• Manufacturer: Pagus

Drill stand PAGUS 4x adjustment foot used, tested !

Antique pillar drilling machine, #10448

ca. 1890 Antique As museum, decoration or exhibition machine. Antique nostalgic column drilling machine very heavy without motor with belt drive height approx. 2.60 m / depth approx. 1.55 m / width approx. 0.75 m...

1999 ALZMETALL AX3/SV

• Manufacturer: Alzmetall
• Model: AX3
• Throat depth: 293 millimeter
• Drilling diameter: 32 millimeter

Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right

WMW BS 10/12

• Manufacturer: WMW
• Throat depth: 205 millimeter
• Drilling diameter: 22 millimeter

column drill incl. machine + vice. Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Bore capacity in steel (diameter): 22 mm | Throat: 205 mm | Bore strok...

WMW SB 13

• Manufacturer: WMW
• Throat depth: 160 millimeter
• Drilling diameter: 13 millimeter

The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included