- Trusted Seller
1984 WMW FUW 315/5
- Manufacturer: WMW
- Model: FUW 315/5
- Power requirement: 7.4 kilowatt
Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: ...
Leipzig, Germany - Trusted Seller
1991 KIHEUNG KMB-U-3
- Manufacturer: Kiheung
- Power requirement: 11.1 kilowatt
Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm)
Leipzig, Germany - Trusted Seller
1977 SHW UF 21
- Manufacturer: SHW
- Model: UF 21
- Power requirement: 10 kilowatt
Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes...
Leipzig, Germany - Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre c...
Leipzig, Germany - Trusted Seller
WMW FH
- Manufacturer: WMW
Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included.
Leipzig, Germany - Trusted Seller
1990 Emco VMC-100
- Manufacturer: Emco
- Power requirement: 0.8 kilowatt
EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door ...
Leipzig, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 used !
$175 USDZschepplin, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 New !
$198 USDZschepplin, Germany - Trusted Seller
tiene eje con etiqueta
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 used, tested !
$291 USDZschepplin, Germany - Trusted Seller
1978 Hurth Maschinen-und Zahnradfabrik LF 1000
- Manufacturer: Hurth
- Power requirement: 8.4 kilowatt
wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55...
Leipzig, Germany - Trusted Seller
SECO cutter arbor
- Manufacturer: Seco
Cutter arbor, tool holder SECO, EPB E9306557104012 Tool holder: Ø 40 mm, length: 40 mm, wedge width: 10 mm New !
$210 USDZschepplin, Germany - Trusted Seller
1995 WAGNER UF1
- Manufacturer: Wagner
- Power requirement: 4.6 kilowatt
The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm
Leipzig, Germany - Trusted Seller
1995 Emco FB-5
- Manufacturer: Emco
- Power requirement: 5.3 kilowatt
Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spin...
Leipzig, Germany - Trusted Seller
1984 ELU AS 70
- Manufacturer: Elu
- Model: AS 70
- Power requirement: 0.8 kilowatt
This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V
Leipzig, Germany - Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
- Power requirement: 15 kilowatt
Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be de...
Leipzig, Germany
Tip: Enter manufacturer, model or keyword