Used Milling Machines in Finland

Lagun FUTV 1400 MILLING MACHINE

• Manufacturer: Lagun

Lagun FUTV 1400 - Rugged UNIVERSAL MILLING MACHINE as shown in the pictures - Spindle revolutions 28-1400 - Sony measuring devices - For horizontal and vertical milling Read more "

EMCO Concept Mill 55

• Manufacturer: Emco

CNC milling machine Austrian EMCO Concept Mill 55 PC-controlled, CNC milling machine with 8-position tool magazine for teaching use. Available controls:

2006 CIRCULAR GRINDER SUPERTEC G 32

• Manufacturer: Supertec

Cylindrical grinder Supertec G 32 - 100 * Has been in the same educational institution for its entire life, where the person responsible for the operation says the machine has been used for a few hours throughout...

Mankeli 2000

A working ironer that works just fine! 2000 mm wide rolls

2007 Disc mankel Akbend ASM-S 200 2100

• Manufacturer: Akbend

Mankeli Akbend * Year model 2007 * Working width approx. 2100 mm * The diameter of the rollers is about 200 mm * Two adjustable relays Read more »

PULL PRESS TRAVEL 90 OK 40

Pull press Reis * Clamp according to the pictures * Technical information on the nameplate YOU CAN GET THE NEW ONES ELSEWHERE, YOU CAN GET THIS FROM US! PURCHASE - SALE - EXCHANGE

EMCO EMCOMAT FB-3

• Manufacturer: Emco

Tool milling machine X/y/z movements: 300/200/350 mm | The distance between the tip of the vertical spindle pinole and the table: 80-430 mm | Spindle speed range: 80-2200 rpm | Quick moves x/y/z: X/Y: 1200 mm/min...

EMCO EMCOMAT FB-450 MC

• Manufacturer: Emco

Tool milling machine X/y/z movements: 450/350/400 mm | The distance between the tip of the vertical spindle pinole and the table: 230-630 mm | Spindle speed range: 10-5000 rpm | Quick moves x/y/z: 5000 mm/min | I...

EMCO Emcomat FB-600 MC

• Manufacturer: Emco

Tool milling machine X/y/z movements: 600/400/400 mm | The distance between the tip of the vertical spindle pinole and the table: 230-630 mm | Spindle speed range: 10-5000 rpm | Quick moves x/y/z: 5000 mm/min | I...

Fermat WPT 130 L

• Manufacturer: Fermat

Floor-type spreading machine Control: Heidenhain / Fanuc Fermat | X-motion: 4000 mm | Y-motion: 2500 mm | Z-motion: 1500 mm | W-motion: 800 mm | Karakartio: 130 mm | Round table: 1800 x 2200 mm | Spindle motor: 3...

Fermat WFT 11

• Manufacturer: Fermat

Spacecraft Control: Heidenhai TNC 640 CNC | X-table transverse movement: 3000 mm | Vertical movement of the y-spindle: 2000 mm | Longitudinal movement of the z-column: 1,250 mm | W-axis movement: 730 mm | Spindle...

1986 GENERAL MILLING MACHINE JAFO JAROCIN FWD-32

• Manufacturer: Jafo
• Model: FWD-32

GENERAL MILLING MACHINE JAFO JAROCIN FWD-32 - Very little used neat milling machine - Suitable for horizontal and vertical milling - A support bearing and one horizontal mandrel for the horizontal beam - Two-way ...