- Trusted Seller
1976 Induma 3/S-A
- Manufacturer: Induma
- Power requirement: 3 kilowatt
Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Eq...
Leipzig, Germany - Trusted Seller
1991 KIHEUNG KMB-U-3
- Manufacturer: Kiheung
- Power requirement: 11.1 kilowatt
Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm)
Leipzig, Germany - Trusted Seller
1984 ELU AS 70
- Manufacturer: Elu
- Model: AS 70
- Power requirement: 0.8 kilowatt
This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V
Leipzig, Germany - Trusted Seller
PAGUS clamping table
- Manufacturer: Pagus
Clamping table, tilting table, milling table PAGUS used, tested !
$685 USDZschepplin, Germany - Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
- Power requirement: 15 kilowatt
Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be de...
Leipzig, Germany - Trusted Seller
1977 SHW UF 21
- Manufacturer: SHW
- Model: UF 21
- Power requirement: 10 kilowatt
Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes...
Leipzig, Germany - Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre c...
Leipzig, Germany - Trusted Seller
Stankoimport 6H80
- Manufacturer: Stankoimport
- Power requirement: 3.2 kilowatt
- spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - inc...
Leipzig, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 used !
$174 USDZschepplin, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 New !
$197 USDZschepplin, Germany - Trusted Seller
tiene eje con etiqueta
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 used, tested !
$290 USDZschepplin, Germany - Trusted Seller
1984 Wilhelm Grupp UF 20
- Manufacturer: Wilhelm Grupp
The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo)
Leipzig, Germany - Trusted Seller
Optimum M3HS
- Manufacturer: Optimum
- Power requirement: 2.4 kilowatt
Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control uni...
Leipzig, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 used, tested !
$209 USDZschepplin, Germany - Trusted Seller
1980 WMW FSS 250x1000
- Manufacturer: WMW
- Model: FSS 250X1000
additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates
Leipzig, Germany
Tip: Enter manufacturer, model or keyword