Used Cnc Milling Machines in Germany

Control rack from Philips MAHO - MH 800C 32219

• Manufacturer: Maho
• Model: MH 800C

CNC control, card slot, control cards, plug-in cards, circuit boards, rack control

BRIDGE PLANER MILLING MACHINE WALDRICH SIEGEN

• Manufacturer: AB

BRIDGE PLANER MILLING MACHINE a year - 1969 Retrofitting 2008 Table Lenght [mm] 4850 + 3810 Table width [mm] 1500 Travel [mm] 8160 Max table load [kg] 20000 + 20000 Head transversal travel [mm] 2770 Head vertical...

Moving column milling machine ITP HA400CNC

• Manufacturer: ITP

SN: 5121, consisting of: 4 moving columns, of which 2x milling unit, 2x measuring unit, travel X approx. 10m each, rail-guided, base plate VA steel, lowered to the floor (strong floor), controller, TFT monitors, ...

vertical CNC milling machine Unitool FS1000 AC 37

• Manufacturer: Unitool

SN: 50041/014, 3 machining axes, travel X/Y/Z 1,840 x 1,000 x 1,000 mm, table size 2,000 x 1,100 mm, table load 5,000 kg, control, Fidia C20, def. BS 27.678, heavy-duty machine vice, jaw width 250 mm, machine hou...

vertical CNC milling machine Huron K2x8

• Manufacturer: Huron

SN: M02260, control system, Heidenhain, travels X/Y/Z 700 x 600 x 450 mm, high-speed machine, max. 12,000 rpm, f. graphite, with closed cabin, extraction system, Ringler, type RE201 D5.5, year 1999, SN 9900017/99...

5-axis CNC simultaneous high-speed milling machine Jobs LinX / C

• Manufacturer: Jobs

SN: 136005111051240, travel X/Y/Z 2,200/3,200/1,250 mm, rigid machine table, L/W 4,000 x 2,500 mm, load capacity 5,000 kg/m², w. cabin enclosure, spindle speed 20,000 rpm, feed 50,000 mm/min, control system, Fidi...

Testing Machines

Coolant system, internal cooling 80 bar, belt filter, robot loading prepared, pallet changer prepared, bra 29,981 total, bra spindle 14,682, 60 tool positions

2008 SORALUCE FL-CENTER 7000

• Manufacturer: Soraluce
• Model: FL-CENTER 7000
• Power requirement: 75 kilowatt

Stock-No. 1034-13883 SORALUCE FL-CENTER 7000 with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 autom toolchanger 100-pockets through spindle coolant 30 bar chip conveyor

2013 SORALUCE FR-30000

• Manufacturer: Soraluce
• Power requirement: 85 kilowatt

Stock-No. 1034-13899 SORALUCE FR-30000 with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip co...

1999 ANAYAK VH plus-2000

• Manufacturer: Anayak
• Power requirement: 48 kilowatt

Stock-No. 1034-13908 ANAYAK VH plus-2000 CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head

2001 KEKEISEN UBF 2500/13 1022-E06273

• Manufacturer: Kekeisen
• Model: UBF
• Power requirement: 44 kilowatt

CNC bed milling machine in good condition An inspection under power in the factory is still possible. New price in 2001: EUR 435.000,-(special price) Operating hours (as of August 2025): Control unit on: 47.295 h...

2016 Jobs JomaX 265 W

• Manufacturer: Jobs
• Model: JOMAX 265 W

Equipped with: Full 5-Axis machining capability. The working area can be divided into 2 areas with a removable barrier, for pendulum machining. Workpiece can be machined while a new workpiece is loaded and clampe...

1988 SHW UFZ 4 1022-E06028

• Manufacturer: SHW
• Model: UFZ 4
• Power requirement: 50 kilowatt

The main engine was overhauled in September 2022 for 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle...

2009 KIHEUNG U 1350 1022-2400

• Manufacturer: Kiheung

In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51,000 euros. Working hours (dated July 31, 2025): Machine on: 38,483 h Auto cycle: 12,798 hours Spindle hou...