Used Machine Tools in New South Wales, Australia

HAFCO Metal Master BM-50VE

• Manufacturer: Hafco

HAFCO BM-50VE milling machine 40int spindle, variable speed 70-4000rpm, table 1337mm x 255mm 5hp 415 volt, power feed to X axis, rapid to Z axis travels X-900mm, Y-370mm, Z-450mm Machine weight approx 1350kg

CME FU-1

• Manufacturer: CME

Universal CME FU-1, table 1100 mm x 240 mm, travels X - 750 mm, Y - 240 mm, Z - 420 mm, feeds & rapids, 40 int spindle, speeds 45-1800 rpm (9 off). Vertical head, universal head, slotting head, dividing head with...

2005 Kingsland Compact 45

• Manufacturer: Kingsland
• Model: COMPACT 45

Kingsland Compact 45 Punch: 22mm x 15mm/38mm x 8mm Shear: Flat 200mm x 15mm/300mm x 12mm Angle 100mm x 10mm Round 30mm Square 30mm Notch: 8mm Selection of punch and dies, 3kw 415volt motor Operators manua...

Nider Geared Head Drill Press

Used Nider Geared Head Drill Press - $1000 + GST - excellent condition - 415v - keyless chuck - same as an Arboga - 100-1300 rpm - geared head - loading available

Pedestal Drill

Strands S-53 geared head pedestal drill 3 morse taper, speeds 100-1360rpm (8 off) 2 speed 415 volt motor 1/1.2hp. Foot safety pedal Made in Sweden. Ex Govt.

Brobo Waldown Work Max Pedestal Drill

• Manufacturer: Brobo

Used Brobo Waldown Work Max Pedestal Drill - $1500 + GST - 415v, 1hp - belt drive - 160 to 5500 rpm - keyed drill chuck - manual table raise and lower - table tilts - Australian made - loading available - pickup ...

Geared Pedestal Drill

Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg

Pedestal Drill

Arboga E-825 3mt spindle, 100-1280rpm .9/.65hp 415volt motor

Brobo Waldown 8SN Drill Press

• Manufacturer: Brobo

Used Brobo Waldown 8SN Drill Press - $1000 + GST - 415v - Australian made - excellent quality - 1hp - 160 to 5500 rpm - loading available - pickup Heatherbrae, NSW

Waldown Radial Arm Pedestal Drill

Used Waldown Radial Arm Pedestal Drill - $1200 + GST - 240v! - Australian made! - in excellent condition - table has had some minor braze repairs - keyless chuck - table lifter - table can rotate - loading available

HAFCO HN-220 Hydraulic Corner Notcher

• Manufacturer: Hafco

Used HAFCO HN-220 Hydraulic Corner Notcher - $4500 + GST - 415v (no plug) - 4mm MS capacity - 12t hydraulic force - 2017 model - foot pedal operated - approx 410kg - loading available

Press Brake

Metal Master PB-160 press brake 160t x 4000mm, 3150 between uprights, 320mm throat, max open height 450mm, 200mm stroke. Full length multi V block, segmented top tooling Etsun E20+ 2 axis NC control, Easy Guard g...

Arboga E-825

• Manufacturer: Arboga

Arboga E-825 3mt spindle, 100-1280rpm .9/.65hp 415volt motor Wind up table and head.

Erlo TCA-32

• Manufacturer: Erlo
• Model: TCA-32

Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg

Centre Lathe

Potisje PA-45/6000 lathe 910mm swing o/bed (630mm o/slide, 1200mm in gap) x 6000mm centres 140mm spindle bore, speeds 11-500rpm (20 off) mm and tpi threading rapid traverse, 2 axis DRO, quick change tool holder w...