Used Machine Tools in Saxony, Germany

WMW clamping drive

• Manufacturer: WMW

Electric clamping drive, clamping force generator WMW EDU I80 M TGL 0-5471 Torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V For other clamping drives, see MMZ159, MMZ739! New! Customers who bought...

WMW clamping drive

• Manufacturer: WMW

Clamping drive, electric clamping force generator WMW EDU I80 TGL 0-5471 Torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0.55 kW for further clamping drives see MMZ158, MMZ739 ! New ! Customers w...

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS without counter pressure plate ! used, tested !

HOFFMANN coolant dispersion

• Manufacturer: Hoffmann

Coolant expansion, coolant filter, suction belt filter HOFFMANN HSF 200 E 220 / 380 V used, tested !

AS TECH Hydraulic nut

• Manufacturer: AS TECH

Hydraulic nut AS TECH HWS16111131 7550.04 KG4 158 kN 700 bar used, tested !

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

INSTRON® grips

• Manufacturer: Instron

Grips, Grippers, Side-Acting Pneumatic Pull Grips, Top + Bottom INSTRON® 2712-046 Mounting: Ø 32 mm, Length: 45 mm, 1x Bore: Ø 12.5 mm Used, tested!

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 68 mm Distance spindle center - upper edge of dovetail: 68 mm dovetail guide: 207 / 182 mm, height: 17 mm, width: 75 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 130 mm Distance spindle center - upper edge of dovetail: 150 mm dovetail guide: 182 / 146 mm, height: 26 mm, width: 66 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Distance spindle center - upper edge of dovetail: 150 mm Dovetail guide: 200 / 155 mm, height: 31 mm, width: 130 mm Material ( housing ): Al...

DOSATRON® emulsion mixing station

• Manufacturer: Pagus

Emulsion mixing station, emulsion mixer, proportional dosing unit DOSATRON® D3RE2 3 m³/h 0.2-2% Control cabinet: RITTAL AE1037.500 LDT Empty signal with flash lamp: RS 236-262 230 V AC, 2 Watt, 50Hz approx. 2.8 m...

PAGUS bearing pedestal

• Manufacturer: Pagus

Bearing block, counter bearing for milling spindle PAGUS Ø 48 mm x 145 mm Distance spindle center - upper edge of dovetail: 145 mm dovetail guide: 118 / 90 mm, height: 21 mm, width: 65 mm used, tested !

STANKO top slide

• Manufacturer: Stanko

Top slide with single steel holder STANKO Guide pin. Ø 30 x 11 mm single steel holder, 360° rotatable insertion height: 50 mm, insertion width: 40 mm, length: 113 mm used, tested !