Used Machine Tools in Bavaria, Germany

Trusted Seller
FLOTT SB M2 ST
- Manufacturer: Flott
- Model: SB M2 ST
- Throat depth: 240 millimeter
- Drilling diameter: 18 millimeter
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel (diameter): 18 / 23mm | Bore depth: 100mm | Throat: 240mm | Spindle speed: 250 - 4000...
Günzburg, Germany
Trusted Seller
ALZMETALL AX 3/SV
- Manufacturer: Alzmetall
- Model: AX3
- Throat depth: 293 millimeter
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Spindle turning speed - stepless: 160-2,250rpm | Spindle stroke: 120mm | Throat: 293mm | Column diameter: 11...
Günzburg, Germany
1998 Geka RM 50 rotary machine
- Manufacturer: Geka
Used Geka three-roll rotary cutter with folding groove and wire insertion grooves. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perf...
Hohenbrunn, Germany
Trusted Seller
TIG welding machine
- Manufacturer: EWM
Freising, Germany
1970 Combination rounding and beading machine 1000mm
- Manufacturer: Beutler
Used 3-roll bending machine, with beading device 1080mm, bar diameter 14mm, Machine is sold as is, without warranty.
Hohenbrunn, Germany
1998 Prinzing RM 52/103 rotary machine
- Manufacturer: Prinzing
Used Prinzing 3-roll rolling machine, with wire insertion grooves, folding groove, back roller manual feed, wheel with scale. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany
1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany
Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
2012 Schröder MAK III swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder MAK III swing bending machine, manual bending jaw adjustment, foot pedal, motorized backgauge. The machine has been professionally repaired, inspected, and cleaned and is fully functional. A test ...
Hohenbrunn, Germany
2023 Swing-Bending Machine SCHECHTL LBX310
- Manufacturer: Schechtl
used Schechtl manual shearing/bending machine, with manual stop 500mm, Year of manufacture: 2023/New/Showroom model with signs of use Machine is repaired, tested, cleaned by a specialist and then fully functional...
Hohenbrunn, Germany
1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany
Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany
2001 Schröder MAK V swivel bending machine
- Manufacturer: Schroeder
- Model: MAK
Used Schröder motorized swing bending machine with NC program control, 12-fold program, with LCD display for bending and upper beam and positioning stop 10 - 1000 mm, wide and narrow extension rails, The machi...
Hohenbrunn, Germany
2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany