Used Machine Tools in Baden-Württemberg, Germany

2006 KELLENBERGER KEL-Vista UR 175-1000

• Manufacturer: Kellenberger
• Model: Kel-Vista UR175/1000
• Grinding length: 1,000 millimeter

Machine completely overhauled in BEMA style with a 12-month warranty. Mechanically and visually as good as new. Photo of a recently completed machine with some different options. Fanuc 21i control system. - UR 1-...

1990 KARSTENS K11

• Manufacturer: Karstens
• Model: K11
• Grinding length: 1,000 millimeter

Machine with very few operating hours after overhaul at Karstens Specialist. Jetter feed control Digital display Internal grinding device Tailstock with fine cylindricity adjustment Hydraulic tailstock quill Etc....

2007 KELLENBERGER KEL-VARIA RS225-1500

• Manufacturer: Kellenberger
• Model: Kel-Varia RS225/1500
• Grinding length: 1,500 millimeter

Machine has been partially overhauled. Sealing and wear parts replaced. Geometry produced according to Kellenberger measuring protocol. Fanuc 18i CNC control -Automatic B-axis with Hirth gearing -Grinding wheel r...

2004 KIRNER K 45

• Manufacturer: KIRNER

Dressing machine for diamond/CBN grinding wheels, optics Profile inspection optics with projector with 10x magnification for positioning, monitoring, and measuring. Dust extraction system with filtration and st...

AVATEC TV 60 trough vibrator with base (2018)

Power supply: 0.75 kVA 230 V 50 Hz, Filling capacity work container: 42 l, Suitable for abrasives 2 - 40 mm room diagonal, Suitable for workpieces from 2 mm in any dimension

1979 MAY-DÖRRENBERG SS 80/100 U

• Manufacturer: MAY-DÖRRENBERG

drill grinding

1987 STUDER S20-2

• Manufacturer: Studer
• Model: S20
• Grinding length: 400 millimeter

Geometrically outdated and repainted With internal grinding setup Accessories on request The machine can be inspected while powered at the customer's site from 2025 through January 2026.

1988 PETEWE PFS 30 CNC

• Manufacturer: PETEWE

CNC profile grinder, BOSCH control, electronic hand wheels

2004 MAG Hülle Hiller NBH135 Speed

• Manufacturer: Hüller Hille

Machining center MAG Hüller Hille Type: NBH135 Speed Year of construction: 2004 Controller: Sinumerik 840D Powerline Travel paths: X = 800 mm Y = 800 mm Z=800mm B = 360 degrees - Spindle: HSK63 tool hol...

2002 STUDER S21 Lean

• Manufacturer: Studer
• Model: S21
• Grinding length: 400 millimeter

Machine serviced and partially overhauled. -New grinding spindle bearing -New x-axis spindle -Upper table ground over -New table geometry -New WSS geometry for grinding spindles B-axis with 1° Hirth coupling Long...

2000 GEHRING ES4-1000-45 NC

• Manufacturer: Gehring
• Model: ES4-1000-45 NC

4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12.3mm -13.3mm -21.1mm

2002 KELLENBERGER Kel-Varia UR225-1500 1-2-6-7

• Manufacturer: Kellenberger
• Model: Kel-Varia UR225/1500
• Grinding length: 1,500 millimeter

EQUIPMENT -T1 500mm grinding wheel diameter -T2 400mm grinding wheel diameter -T6 internal grinding device -T7 internal grinding device -9.8kW water-cooled spindle motor -Marposs tool measurement -Active longitud...

1999 STUDER S36 Favorit

• Manufacturer: Studer
• Model: S36
• Grinding length: 540 millimeter

In 2015, Studer overhauled the spindle head, tailstock, and workpiece table. In 2024, Studer replaced the X+Z axis drive. The system included a coolant system with a magnetic roller, a workpiece spindle, a tails...

2005 DMG DMC 70 H duoBlock

• Manufacturer: DMG Mori
• Model: DMC 70 H DUOBLOCK

DMG DMC 70 H duoBlock Year of manufacture 2005 Travel X: 700 mm Travel Y: 800 mm Z travel: 800 mm Number of axes: 4 Milling machine / machining center Control: Sinumerik 840D powerline Spindle mount: SK 4...

2010 KELLENBERGER KEL-VITA with loader

• Manufacturer: Kellenberger
• Grinding length: 1,000 millimeter

Completely mechanically overhauled. Including grinding and setup on a single part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Tu...