Used Lathes in Germany

Tailstock from – center height 155 to 165 mm 29813

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Three-jaw chuck key from – square 17 mm 21258

Three-jaw chuck wrench, three-jaw lathe chuck Square size: 17 mm | Sleeve: Ø 38 mm | Number: 2x available | Mass: 2 | Internal storage: 3C30304

Four-jaw chuck from – Ø 190 mm 36181

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Four jaw chuck: Chuck size Ø 190 mm | Passage: Ø 57 mm | Hole circle: Ø 170 mm | Change jaws: Width 20 mm not included, can be supplied at an additional cost | Di...

Four-jaw chuck from Röhm - Ø 315 mm 27590

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 103 mm | Hole circle: Ø 195 mm | Mass: 56 | Internal storage: 3A21202

Four-jaw chuck from Röhm - Ø 315 mm 28068

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 105 mm | Hole circle: Ø 235 mm / M20 | Admission: Short taper 11 | Mass: 56 | Internal storage: 3A21202

Three-jaw chuck by WMW Niles - diameter 250 mm 21666

• Manufacturer: Niles

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck

Three-jaw chuck by WMW Niles - Diameter 250 mm 19487

• Manufacturer: Niles

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck

Precision three-jaw chuck from SCA Skand Chuckfabriks - Ø 230 mm 34065

• Manufacturer: SCA Skand Chuckfabriks

Three-jaw chuck, three-jaw lathe chuck, precision three-jaw chuck

Key bar chuck from – Ø 290 mm 36444

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks

Dividing head gears 71 pieces from – module 1.5 35565

dividing head, dividing head, gear wheel, gear wheels lathe, spur gears, spur gear

Wedge bar of SMW - 220 mm 19020

• Manufacturer: SMW

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks. -change jaws:

Hydraulic power chuck from – Ø 215 mm 36443

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks

Electric tensioner from Berg - FSP 140 U 23298

• Manufacturer: Berg

Clamping motor for wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck, power chuck hydraulic motor electric clamp

Repar2 Robust Wire Chuck Shield Mount Arm

• Manufacturer: Repar2

Increase the safety and efficiency of your machining operations with the Repar2 wire chuck shield mount arm. This arm designed for metal lathes facilitates the mounting of the chuck shield and effectively deflect...

Bezel from Stankoimport – 36642.M44 Diameter 75 mm 36526

• Manufacturer: Stankoimport

steady rest, steady rest, lynette Bezel: max. passage Ø 75 mm | Type: 36642.M44 | Tip height: approx. 125 mm see photos | Dimension ges.: 135/310/260 mm | Mass: 7,3 | Dimensions: 135/310/H260 mm