Used Lathes in Germany

Three-jaw chuck from – diameter 250 mm 19672

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Recess: Ø 194 mm | Hole circle: 3 x 214 mm | Passage: Ø 70 mm | Mass: 17 | Internal storage: 3A20501

Three-jaw chuck from – diameter 200 mm 19669

Three-jaw chuck, three-jaw lathe chuck Without: Interchangeable jaws | Feed size: Ø 200 mm | Recess: Ø 162 mm | Hole circle: 3 x 180 mm | Passage: Ø 52 mm | Mass: 13 | Internal storage: 3A10301

Three-jaw chuck from – diameter 250 mm 19654

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Adapter plate with threaded receptacle: Ø 67 mm | Passage: Ø 51 mm | Mass: 27 | Internal storage: 3A20401

Three-jaw chuck from – diameter 250 mm 19555

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Short taper: Ø 105 mm | Passage: Ø 76 mm | Mass: 26 | Internal storage: 3A20101

Three-jaw chuck from – diameter 190 mm 19550

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 190 mm | Recess: Ø 155 mm | Hole circle: Ø 174 mm | Passage: Ø 54 mm | Mass: 11 | Internal storage: 3A10402

Three-jaw chuck from – diameter 250 mm 19554

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Short taper: Ø 140 mm | Passage: Ø 76 mm | Mass: 30 | Internal storage: 3A20103

Tailstock from – center height 150 mm 35775

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Tailstock for WMW dividing head - 645/90/H200 mm 35362

• Manufacturer: WMW

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Tailstock from – center height 150 mm 34266

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Tailstock from – center height 155 to 165 mm 29813

Tailstock, counter bearing for dividing head, dividing attachment, lathe

Three-jaw chuck key from – square 17 mm 21258

Three-jaw chuck wrench, three-jaw lathe chuck Square size: 17 mm | Sleeve: Ø 38 mm | Number: 2x available | Mass: 2 | Internal storage: 3C30304

Three-jaw chuck Clamping aid of aluminum - diameter 250 mm 6738

• Manufacturer: Alu

three-jaw chuck, three-jaw lathe chuck -clamping plate

Three-jaw chuck from AROWA - diameter 240 mm 6452

• Manufacturer: AROWA

three-jaw chuck, three-jaw lathe chuck -clamping plate

Four-jaw chuck from – Ø 190 mm 36181

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Four jaw chuck: Chuck size Ø 190 mm | Passage: Ø 57 mm | Hole circle: Ø 170 mm | Change jaws: Width 20 mm not included, can be supplied at an additional cost | Di...

Four-jaw chuck from Röhm - Ø 315 mm 27590

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 103 mm | Hole circle: Ø 195 mm | Mass: 56 | Internal storage: 3A21202