1975 NISHIMORI unidentified Lathe
- Manufacturer: NISHIMORI
chuck::1000, swing:1150, through-bore diameter:110, core interval:2400, touch stoppertwo pieces, control panel(MODEL:NAK)
Aichi, Japan
1990 BLUE LINE AL-6A Lathe
- Manufacturer: BLUE LINE
bed swinｇ：520, wave it in a carriage：295, through-bore：60, 28-1210rpm
Aichi, Japan
1997 MAZAK INTEGREX30 CNC Lathe
- Manufacturer: Mazak
- Model: INTEGREX 30
MAZATROL T PLUS, chuck:10 inch, swing on the carriage:400, S:Y1800, 35-3500rpm, BT40, chip conveyor
Aichi, Japan
2006 HOWA OHKUMA 2SP-10HG
- Manufacturer: Okuma
- Model: 2SP-10HG
Distance between both spindles: 310mm,. Max. machining: ø100*100mm, Main spindle through-hole diameter: φ52mm 50～5000rpm, S:(X)150*(Z)175mm In case of any discrepancy between the description and the actual produc...
Toyohashi, Japan
1975 Eguro Ironworks EL-2
- Manufacturer: Jiangmu Iron Works
Swing over bed:180mm,. Distance between centers:250mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
2007 Kitamura KL-25
- Manufacturer: Kitamura
- Model: KL-25
Swing over bed:300mm,. Distance between centers:270mm, Main spindle 600-3400rpm(60Hz), 6 steps Brake failure In case of any discrepancy between the description and the actual product, the actual product will be g...
Toyohashi, Japan
1968 Okuma Ironworks LS-540×800
- Manufacturer: Okuma
Swing over bed:540mm,. Distance between centers:800mm, 35 to 1800rpm (12 steps), 3-jaw chuck If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
1983 Dainichi DLG-SHB63×200
- Manufacturer: 大日
φ630×2000 Spindle through-hole diameter 84φφ450 4-jaw single acting chuck 12-inch 3-jaw scroll chuck Fixed swing stop Machine No. 19207
Handa, Japan
Handa, Japan
Mori Seiki MR-1000G
- Manufacturer: Mori Seiki
- Model: MR-1000G
φ520×1000 Swing over cut-off φ750 Fixed swing stop Machine No. 1854
Handa, Japan
Handa, Japan
Handa, Japan
2004 Citizen RL01 III
- Manufacturer: Citizen
FANUC 0i-T, Maximum machining diameter: φ10*50, Collet chuck, Feeder included *If there are any discrepancies between the product description and the actual product, the actual product will take precedence.
Toyohashi, Japan
2006 Techno Washino J1
- Manufacturer: Washino
- Model: J1
FANUC 21i-TB, Spindle Speed: 4000 rpm, Span: (X)100*(Z)220 mm, Tool Post: 8-sided Turret, Collet Chuck, Loader Included *If there are any discrepancies between the product description and the actual product, the ...
Toyohashi, Japan
2004 Okuma LB250T
- Manufacturer: Okuma
- Model: LB250T
OSP-E10L, Spindle: 8-inch, 4500 rpm, Turret: 12-sided, S: (X)180*(Z)325mm, Swing above bed: φ530mm, Maximum machining diameter: φ300mm, Maximum machining length: 150mm *If there are any discrepancies between the ...
Toyohashi, Japan
Tip: Enter manufacturer, model or keyword