Used Ironworkers in Ohio, USA

VIDMAR CABINET TOOLROOM WORK BENCH

• Manufacturer: Vidmar

419-269-2000 870 Curtis Street Toledo, OH 43609 Machine Information VIDMAR CABINET TOOLROOM WORK BENCH: YOBRO #24230 Stock #: 24230

95 TON IRON CRAFTER 95-95 HMW HYDRAULIC IRON WORKER

66 TON PEDDINGHAUS 210 SUPER 13 IRONWORKER: STOCK #80589

• Manufacturer: Peddinghaus
• Model: 210 SUPER 13

Stock#: 80589 | Punching capacity: 66 TON | Diameter of hole through plate: 1" THROUGH 1" | Depth of throat: 14" | Length of stroke: 1 -1/16" | Angles at 90 degree: 5" x 5" x 1/2" | Angles at 45 degree: 3 -1/2" ...

5" X 5" X 1-1/2" BUFFALO MODEL #1-1/2 IRONWORKER: STOCK #79487

• Manufacturer: Buffalo
• Model: 1-12

COPER ON SHEAR END .. YES Stock#: 79487 | Punching capacity: 65 TONS | Maximum hole diameter through: 1-1/16 X 3/4" | Depth of throat: 20" | Shearing capacity angles @ 90 degrees: 5" X 5" X 1/2" | Shearing capaci...

70 TON 5" X 5" X 1/2" GEKA MODEL 70S HYDRAULIC IRONWORKER: STOCK #79168

• Manufacturer: Geka

Stock#: 79168 | Capacity punching: 77 TON | Maximum hole diameter: 1-1/8" X 3/4" | Capacity angles at 90 degrees: 5" X 5" X 1/2" | Capacity angles at 45 degrees: 3" X 3" X 5/16" | Flats: 18" X 5/8" | Rounds: 1-3...

110 TON GEKA CNC HYDRAULIC IRON WORKER: STOCK #80264

• Manufacturer: Geka

Stock#: 80264 | Model #: HYD 110 SD | Capacity: 110 TON | Punching capacity: 1-1/2" X 3/4" | Depth of throat: 24" | Stroke: 3-5/32" | Strokes per minute: 20 @ 3/4" | Shear flats: 24" X 5/8"; 16" X 3/4" | Length ...

30-TON EDWARDS DUO-PRESS: STOCK #80592

• Manufacturer: Edwards

Stock#: 80592 | Capacity: 30 TONS | Stroke: 3" | Punching capacity: 1" THRU 3/8" | Depth of throat: 5-1/2" | Open height: 10" | Closed height: 7" | Notcher: 3" X 3" | Electric foot peadl: YES | Motor horsepower:...

HILL ACME KLING NUMBER 3 METAL WORKER: STOCK #79523

• Manufacturer: Hill Acme

SHEARING CAPACITIES: HYDRAULIC UNIT DRIVE MOTOR .. 5 HORSEPOWER

50 TON MUBEA IRON WORKER: STOCK #79293

• Manufacturer: Mubea

SERIAL ............................. Stock#: 79293 | Punching capacity: 50 TONS | Punching size: 3/4" HOLE THUR 3/4" THICK | Depth of throat: 16" | Strokes per minute: 30 @ 1/2" | Table area: 30" X 15" | Angle sh...

STK #71575

• Manufacturer: METAL MUNCHER

Stock#: 71575

BRADBURY, FOUR NOTCH HEADS, 28 UNITOOL PUNCH HEADS PRESS #71626

• Manufacturer: Bradbury

BRADBURY PRE-PUNCH AND NOTCH PRESS Stock#: 71626 | Adjustable entry edge guides: 12" MAX WIDTH | Three notching presses: 7" BETWEEN POST | Six post press with unipunch punches: 28 PUNCHES | Die set size: 24" X 40...