Used Injection Molding in Germany

1999 KRAUSS-MAFFEI KM 450-3500 C3
- Manufacturer: Krauss-Maffei
- Model: KM 450-3500 C3
Control type: conventional | Storage location: 45473, Mülheim on the Ruhr | Freight basis: in stock | Currency: EUR | Control: MC 4 | Screw diameter: 80 mm | Closing force: 4500 kN | Machine weight approx.: 26.0...
Hamburg, Germany
2003 Wittmann W620M -636, Robot System
- Manufacturer: Wittmann
- Model: W 620
Removal X-axis 300 mm PNE Vertical Y-axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT
Mülheim, Germany
1997 DEMAG Ergotech pro 50-270
- Manufacturer: Demag
- Model: Ergotech
Clamping force: 50 ton | Opening stroke: 400 mm | Distance between tie bars: 355 x 355 mm | Mould height min.: 210 mm | Platen size (h x v): 540 x 540 mm | Screw diameter: 35 mm | Injection volume: 106 cm³ | Sho...
Mülheim, Germany
2001 ENGEL ES 1350H 200W / 300HL-2F
- Manufacturer: Engel
- Model: ES 1350
Clamping force: 300 ton | Opening stroke: 855 mm | Platen size (h x v): 1050 x 650 mm | Screw diameter: 60 +35 mm | Injection volume: 735 +135 cm³ | Shot weight: 662 + 122 g | Injection pressure: 1834 +1620 bar ...
Mülheim, Germany
1998 DEMAG ERGOtech system 800-310
- Manufacturer: Demag
- Model: Ergotech
Clamping force: 80 ton | Opening stroke: 450 mm | Distance between tie bars: 370 x 370 mm | Mould height min.: 200 mm | Platen size (h x v): 600 x 600 mm | Screw diameter: 35 mm | Injection volume: 168 cm³ | Sho...
Mülheim, Germany
34.500 PCO1881-closures on 48 cavities/hour
- Manufacturer: BMB S.p.A.
Capacity matching pre-used injection molding machine, model KW 28PI/2200, built by BMB S.p.A., Brescia, Italy – see separate description in section INJECTION MOLDING EQUIPMENT
Schwerin, Germany
10902 HAITIAN 470t HTF470W
- Manufacturer: HATIAN
HAITIAN HTF470W Working hours 9700 Screw 70mm Controller: CP233/Z | Working hours: 9500h | Injection volume: 1424cm3 | Installed power motor: 86kW
Germany
2007 ENGEL 1100T/7050
- Manufacturer: Engel
Injection: General: Options: Length: 10.600 mm | Width: 3.500 mm | Height: 2.700 mm | Weight: 39.000 kg | Force closing: 1,100 tons | Screw diameter: 120 mm | Passage x columns: 1.400 mm | Passage y columns: 1.15...
Germany
10903 HAITIAN 600t HTF600W
- Manufacturer: HAITIAN
HAITIAN HTF600W in very good condition, like new. Only 9700 working hours Screw 85mm Distance between tie bars: 880x880mm Can be seen under power and working
Germany
2010 Engel 500/120 spex
- Manufacturer: Engel
Length: 4.820 mm | Width: 1.480 mm | Height: 2.010 mm | Weight: 6.800 kg | Force closing: 120 ton | Screw diameter: 40 mm | Passage x columns: 0 mm | Passage y columns: 0 mm | Injectable volume: 251 cm³ | Closin...
Germany
STORK SX6600-8600
- Manufacturer: Stork
- Model: SX6600-8600
Control: konventionell | Screw size: 98 mm | Closing pressure: 8600 kN | Total power requirement: kW | Weight of the machine ca.: t | Dimensions of the machine ca.: m | Injection shot weight in polysterol: unbkt...
Göppingen, Germany
2007 DEMAG Ergotech 150 520-600
- Manufacturer: Demag
- Model: Ergotech
Control: konventionell | Machine location: Göppingen/Ursenwang | Screw size: unbkt. mm | Injection shot weight in polysterol: unbkt. g/PS | Closing pressure: 150 kN | Total power requirement: kW | Weight of the ...
Göppingen, Germany
1990 STORK ST 2500-440
- Manufacturer: Stork
- Model: ST 2500-440
Volt: V | Volumn: 1660 | Control: konventionell | Screw size: 84 mm | Freight basis: frei auf LKW | Closing pressure: 440 kN | Machine location: Niederlande | Total power requirement: kW | Weight of the machine ...
Göppingen, Germany
STORK
- Manufacturer: Stork
Control: konventionell | Screw size: 62 mm | Closing pressure: 3300 kN | Total power requirement: kW | Weight of the machine ca.: t | Dimensions of the machine ca.: m | Injection shot weight in polysterol: 903 g...
Göppingen, Germany
1991 STORK ST9400-800
- Manufacturer: Stork
Control: konventionell | Screw size: 133 mm | Injection shot weight in polysterol: 5940 g/PS | Closing pressure: 8000 kN | Total power requirement: kW | Weight of the machine ca.: t | Dimensions of the machine c...
Göppingen, Germany
Arburg Allrounder 720 Injection Molding
- Manufacturer: Arburg
- Model: Allrounder 720
Good condition Arburg Allrounder 720 Injection Moldings manufactured in 2007. Located in Denmark and other countries. Click request price for more information.
Denmark