Used Industrial Automation in Switzerland

pneumatic cylinders

pneumatic cylinders

BRIC Fontaine solvante

• Manufacturer: Bric

Degreasing tank for all types of parts Equipped with electric or pneumatic or pneumatic pumps, it is designed to be fitted directly onto a 220L NOTRALEX SECURISANT drum. Designed for maximum mobility, the chassis...

BRIC Ocean wave

• Manufacturer: Bric

Biological degreasing fountain for the environment: efficient, effective and economical degreasing of parts. A new-generation fountain: Optimized cleaning: solvent-free cleaning, respect for the operator and the ...

FEINTOOL GKP-F-40

• Manufacturer: FEINTOOL

Slide pressure: 40 to | Hydraulic counterpressure: 0.5 - 12 to | Hydraulic hold down: 2 - 12 to | Fixed table length: 300 mm | Width: 1500 mm | From: 36 mm | Up to: 90 mm | T-channel width: 12 mm | Maximum thick...

FEINTOOL GKP-F-40

• Manufacturer: FEINTOOL

Slide pressure: 40 to | Hydraulic counterpressure: 0.5 - 12 to | Hydraulic hold down: 2 - 12 to | Fixed table length: 300 mm | Width: 400 mm | From: 110 mm | Up to: 180 mm | T-channel width: 12 mm | Maximum thic...

2018 YASKAWA MOTOMAN MPL500 II Ref No: 43487

• Manufacturer: Yaskawa - Motoman

4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

2022 FANUC LR Mate 200 iD 14L

• Manufacturer: Fanuc
• Model: LR Mate 200iD/14L

This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 ...

2020 ABB Ref No: 49369

• Manufacturer: ABB
• Model: REF

Robot welding cell incl. positioner Hydraulic 3D welding table ABB max. workpiece weight 2 tons and max. diameter 1400 mm Robot IRB 4600 M2004 Welding torch system Wire Select 2.0-Vers.LSQ5/Q80 with 2-fold wire f...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

LIGHT CURTAIN “SICK” TYPE C-4000

• Manufacturer: Sick

L=1000 mm.

DC MOTOR WITH PERMANENT MAGNET “ESTAN” TYPE GfmO 8/4

180V – 75W – 0,52A – 3000min-1 – IP44

MOTOR “GRUNDFOS” TYPE MG 100 LA4

• Manufacturer: Grundfos
• Model: MG100LA4

220/380V – 50Hz – 0.7/5.6A – 1410 min-1 Weight: 18 kg

ELECTRIC MOTOR “D” TYPE DP80B

380V – 0,6/0,8 Kw – 50Hz – 1400/2800 min-1

Temperature Control Unit - Huber - HTS 30-H12 - VP.052.LZ-VP.059.LZ

• Manufacturer: Huber
• Model: HTS 30-H12

Control via Pilot ONE 8 Units Available Heating: 12 kW | Max. pump: 4.7 bar at 70 L/min | Connection: G 1 1/4" | Dimensions: 940 x 1050 x 1130 mm | Weight: 273 kg