Used Industrial Automation in Saxony, Germany

AWATECH industrial filters

• Manufacturer: AWATECH

Industrial filter, electrostatic, extraction and filter system AWATECH ANLAGENBAU GmbH EF 16 -SP- used, tested, thoroughly cleaned !

2012 Industrial Robot ABB IRB 6640-180/2.55

• Manufacturer: ABB
• Model: IRB6640

Item Description/Artikelbeschreibung: Lot consists of: (1) Industrial Robot Position besteht aus: (1) Industrieroboter Technical Details/Technische Details: English: • Axes: 6 • Maximum payload: 180 kg • Reach: 2...

IFS industrial filters

Industrial filters, extraction and filter systems IFS INDUSTRIEFILTER - SERVICE GmbH IFM 1000 ( IFM1000 ) IP54 used, tested !

EWAB ST1130

• Manufacturer: Ewab

Cold wash system integrated into the automation line belt filter, flow system

2001 Heinrich Fritzsche Messloh 01/0541

• Manufacturer: Heinrich Fritzsche

Conveyor washing machine Machine No.: 25, control Siemens Simatic OP17

2012 FESTO LFR-1-D-Maxi

• Manufacturer: Festo

filter control valve LFR-1D-MAXI Update: last on 30.07.2021

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: Ø 25 mm, length: 37 mm Shaft diameter: Ø 30 mm, length: 27 mm Shaft diameter: Ø 40 mm, le...

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug New !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: Ø 25 mm Shaft piece: Ø 15 mm, length: 27 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4011-176D-C2Z 98L6-0067 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4014-124D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

SCHUNK angular gripper

• Manufacturer: Schunk

Angular gripper, 2-finger angular gripper SCHUNK GM 400 313098 used, tested !

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 685 x Ø 24 mm Thread: Ø 24 mm Shaft stub: Ø 17 mm, length: 15 mm stub shaft: Ø 15 mm, length: 30 mm with ball nut: R51324014 used, tested !

SCHUNK robot module

• Manufacturer: Schunk

Robot module, standard SCHUNK VERO-S NSR 160 471915 Suitable clamping bolt: AT294 used, tested !

SCHUNK centric gripper

• Manufacturer: Schunk

Centric gripper, 3-finger gripper SCHUNK PZN+80/1 303311 2,0 - 8,0 bar used, tested !