Used Incubators in Netherlands

Snijders EB1 -485 Cooling incubator

• Manufacturer: Snijders

Cooling incubator Type EB1 -485 ltr 4 in height adjustable stainless steel insert trays Swivel casters with brake Digital temperature controller, second temperature working in combination with weekly clock with s...

Binder KBW 400 Cooling incubator with lighting

• Manufacturer: Occasion

The used Binder KBW 400 is a robust, spacious cooling incubator with a stainless steel interior, 3 stainless steel wire racks, 3 fluorescent light plates and a glass inner door. Exterior coated. Interior stainles...

2020 Binder CB 170 CO2 Incubator

• Manufacturer: Binder

This new, unused CO2 incubator was purchased for an MBO program in Laboratory Techniques, then not used. Sterilization by hot air 180 °C Humidity system with double shelf and condensation protection CO2 gas mixer...

Sanyo MIR 253-144 Cooling incubator

• Manufacturer: Sanyo
• Model: MIR-253

Temperature adjustable and readable in 0.1°C increments from 0-50°C External dimensions: approx. 700 x 580 x 1620 mm WxDxH Internal dimensions: approx. 620 x 385 x 1075 mm WxDxH 250 liters Internal stainless stee...

Double Infors Multitron CO₂ Shaking incubator

• Manufacturer: Infors HT
• Model: Multitron

Weight: 180 kg | Guarantee: 6 months | Temperature range: ambient temperature +5°C to 65°C | Temperature accuracy: ± 0.2°C | Measurement uniformity: ± 0.15°C | Control accuracy capillary thermostat: ± 2.5°C | Co...

RS Biotech Galaxy CO2 Incubator

• Manufacturer: Biotech

The RS Biotech Galaxy CO2 Incubator works precisely and reliably with a direct heating system that completely surrounds the chamber and ensures an even temperature distribution. C02 does not work. No C02 range Di...

Thermo Heratherm IGS400 Incubator Oven

• Manufacturer: Thermo Fisher Scientific
• Model: IGS400

Gravity convection provides a gentle airflow and minimal drying. Corrosion-resistant stainless steel chamber (AISI 430). Intuitive user interface for setting the temperature. Large, easy-to-read vacuum fluorescen...

Thermo HERAcell 240 CO2 incubator

• Manufacturer: Thermo Fisher Scientific
• Model: Heracell 240i

Weight: 85,0 kg | Guarantee: 6 months | Temperature range: Environment + 3°C to 55°C | Temperature recovery at 37°c with door open for 30 seconds: <10 min | Moisture at 37°c (high humidity mode): 95% RH | Moistu...

Binder CB210 CO2 Incubator

• Manufacturer: Binder

Automatic sterilization with hot air at 180°C Humidity system with double tray and condensation protection

Binder CB 210 CO2 incubator

• Manufacturer: Binder

Automatic sterilization with hot air at 180°C Humidity system with double tray and condensation protection

Sanyo MIR 552-140 Cooling incubator

• Manufacturer: Sanyo

temperature digitally adjustable and readable in 0.1 C steps from 0-50 C external dimensions approx 800x830x1800 mm WXD...H internal dimensions approx 640x550x1150 mm WXD...H 400 L internal - stainless steel; ext...

Thermo Cytoperm 2 CO2 incubation chamber

Temperature deviation: at 37 °C is < +0.5K, at 50°C is < +0.7K Heating time from 23 °C to 37 °C: 5 hours Cooling time from 37 °C to 25 °C: 5 hours Recovery time (at 37 °C): 3 minutes Water quality: distilled or f...

2015 Binder CB160 CO₂/O₂ Incubator

• Manufacturer: Binder

Weight: 107 kg | Guarantee: 6 months | Temperature range: ambient temperature +7 to 60 °C | Temperature fluctuation (at 37 °c): ± 0.1 K | Temperature uniformity (at 37 °c): ± 0.3 K | Recovery time after 30 s ope...

Storex Incubator

BR 3982 Storex Liconic STR 240 HC The unit was purchased at the end of 2010 as part of a large Elisa platform. However, this platform was never put into service and has since been split up and used in several oth...

Binder CB 220 CO2 incubator

Automatic sterilization with hot air at 180°C Moistening system with double pan and condensation protection Gas connection kit not included (see photos for set)