Used Honing Machines in Germany

GEHRING S-NC 250-45 honing machine

• Manufacturer: Gehring

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING S-NC 250-45 honing machine

• Manufacturer: Gehring

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING S-NC 250-45 honing machine

• Manufacturer: Gehring

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

2000 NAGEL SCD 200 1113-235072

• Manufacturer: Nagel
• Power requirement: 12 kilowatt

Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...

1990 SUNNEN MBC-1800 - G 1113-210007

• Manufacturer: Sunnen

Control type: conventional | Freight basis: FCA | Honing: mm | Hub: mm | Tip height: mm | Total power requirement: kW | Machine weight approx.: 1 t | Space requirement approx.: 2 x 2 x 2 m

GEHRING P350-31P 1113-22432

• Manufacturer: Gehring

Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm

2013 SUPFINA 622/1 1113-215123

• Manufacturer: SUPFINA

Control type: CNC | Control name: Siemens 840D | Freight basis: FCA | Workpiece diameter: mm | Circumferential diameter: 80 mm | Workpiece length: 450 mm | Total power requirement: kvA | Machine weight approx.: ...

1970 Polishing Machine KEIN TYPENSCHILD

• Manufacturer: KEIN TYPENSCHILD
• Power requirement: 2 kilowatt

Double Disc Grinding Machine - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic - ginding disc surface diameter:680mm - grinding disc material: sand paper - suc...

Polishing Machine KEIN TYPENSCHILD

• Manufacturer: KEIN TYPENSCHILD

Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch

Wheel Grinder - Double -

Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding bl...

2003 NAGEL VS8-60 SV

• Manufacturer: Nagel
• Model: VS 8

Unique honing machine built for inline motor blocks and v-blocks. Universal also for other parts because of the controlled movement of the table in y and the spindle in x. Movement x: 2000mm Movement y: +-150mm -...

2010 MONNIER & ZAHNER MZ640

• Manufacturer: MONNIER & ZAHNER

CNC Ball and spherical honing machine Type of control: CNC | Control: FANUC | Honing diameter: 54 mm | Stroke: 99999 mm | Centre height: 9999 mm

GEHRING Z 350-125

• Manufacturer: Gehring
• Model: Z350-125

Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block The machine tool does not currently meet the basic safety and protection requirements as specified in the Bet...