Used Honing Machines in Germany

GEHRING S-NC 250-45 honing machine

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING S-NC 250-45 honing machine

• Manufacturer: Gehring

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

GEHRING S-NC 250-45 honing machine

Manufacturer: Maschinenfabrik Gehring GmbH & Co, 73760 Ostfildern , Germany Model No.: S-NC 250-45 Serial number: 720/4731 Year of Make: 1999 Control voltage: 24V DC Operating voltage: 400V AC, 50Hz Nominal power...

1990 SUNNEN MBC-1800 - G 1113-210007

• Manufacturer: Sunnen

Control type: conventional | Freight basis: FCA | Honing: mm | Hub: mm | Tip height: mm | Total power requirement: kW | Machine weight approx.: 1 t | Space requirement approx.: 2 x 2 x 2 m

GEHRING P350-31P 1113-22432

• Manufacturer: Gehring

Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm

2000 NAGEL SCD 200 1113-235072

• Manufacturer: Nagel
• Power requirement: 12 kilowatt

Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...

2013 SUPFINA 622/1 1113-215123

• Manufacturer: SUPFINA

Control type: CNC | Control name: Siemens 840D | Freight basis: FCA | Workpiece diameter: mm | Circumferential diameter: 80 mm | Workpiece length: 450 mm | Total power requirement: kvA | Machine weight approx.: ...

1965 GEHRING 1 Z 250-131

• Manufacturer: Gehring
• Model: 1 Z

180 degree turntable, various accessories - Mounted 2-station swivel table for holding holding 2 workpieces with mechanical workpiece clamping via hand lever. - Hydraulic infeed of the tool - Switch-off via time ...

1986 NAGEL HHM 110/HA 150

• Manufacturer: Nagel
• Model: HHM 110HA 150

large hand honing machine, tire diameter control - Infinitely variable speed control of the honing honing spindle with speed display, and with two-stage motor drive and 2-stage belt drive - Lifting device for aut...

NAGEL HHM 90

• Manufacturer: Nagel
• Model: HHM 90

Hand honing machine, accessories and tools Hon-ø (mm): 100 | Hon length (mm): 150

1998 KADIA VZH 90/450 F

• Manufacturer: Kadia

vert. Honing machine, UNIPOS Ctrl. - Machine equipped with PLC control SIEMENS S 5 / Unipos 4.0 to input of all important honing parameters like tool speed, stroke length, expansion, honing time, error messages, ...

SUNNEN(USA) MBC-1804-G

• Manufacturer: Sunnen

Horizontal honing machine with automatic stroke and measuring control · Automatic machining cycle with automatic mechanical stroke, automatic hydraulic-mechanical honing tool expansion, and automatic shutdown whe...

1984 GEHRING M 3-40-12

• Manufacturer: Gehring

3-spindle, With measuring device - Machine is equipped for precision honing of a car valve body approx. Æ12 x 40 mm high, with a blind hole of approx. Æ8 mm x 20 mm, consisting of: - BOSCH SPS-control for program...

2000 NAGEL 2VS5-30RA

• Manufacturer: Nagel
• Model: 2VS5-30RA

Machine is like new. -pre-honing with electromechanical expansion -measuring -finish honing with electromechanical expansion -measuring Clamping for piston housings are on the machine. Of course other parts can b...