Used Heat Exchangers in Japan

Multitubular heat exchanger

Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

Multitubular heat exchanger

2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.

Multitubular heat exchanger

Heat transfer area: Under investigation (10m2?) Material: Wetted part SUS | Quantity saved: One

Multi-tube heat exchanger, vertical type

Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2

［Carbon multi-tube heat exchanger (vertical type)

Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2

Shell and tube heat exchanger (tube and shell)

Heat transfer area: Approx. 7m² Tube: Stainless steel Shell: Stainless steel Application: Heating and cooling waste oil, etc.

2003 [Maeda Iron Works] Multi-tube heat exchanger

• Manufacturer: 前田鉄工所

This heat exchanger cools and condenses vapor generated by a vacuum concentrator (3000-4000 kg/hour evaporation rate). External dimensions: Approx. 1000mm diameter (excluding legs) x 4200mm high, Weight: Approx. ...

[Nisso Engineering] Multi-tube heat exchanger 20m²

• Manufacturer: 日曹エンジニアリング

Heat transfer area: 20 m2 Material: Tube: STB340-SC Shell: SUS304 (bolts and nuts: SS)

[Sumitomo Chemical Engineering] Multi-tube heat exchanger 20m²

• Manufacturer: 住友ケミカルエンジニアリング

Heat transfer area: 20㎡ Material: Tube: SUS304 Shell: SS400 Drawings available

SEC FK-22-10

• Manufacturer: エスイーシー

Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G

1991 Carbon capacitor

Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)

SSC RC456SK-42-9

• Manufacturer: エスイーシー

Cubic type Heat transfer area: 1.12 m2 Material: carbon | Quantity saved: One

［Carbon capacitor No model

Heat transfer area: Unknown as there is no nameplate (estimated from size to be around 5-10 m2).

［Tokai Carbon] Carbon capacitor No model

• Manufacturer: 東海カーボン

Heat transfer area: 5.9m2 Quantity saved: 1

1999 Le Carbon Cubic

• Manufacturer: ル・カーボン

Cubic type heat transfer area 18.5 m2 Carbon part defective