Used Grinding Machines in Germany

Trusted Seller
1981 STANKO MOSKAU 3M151
- Manufacturer: Stanko
- Model: 3M151
- Grinding length: 700 millimeter
- Power requirement: 13 kilowatt
Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is e...
Leipzig, Germany
Trusted Seller
1982 KELLENBERGER URF320
- Manufacturer: Kellenberger
- Model: URF320
- Grinding length: 600 millimeter
Machine was overhauled according to Kellenberger measuring protocol and repainted. The vulnerable Güttinger control system was replaced by the modern BEMA X control system. replaced. This means that the machine a...
Stuttgart, Germany
Trusted Seller
1986 KELLENBERGER 600U
- Manufacturer: Kellenberger
- Model: 600U
- Grinding length: 600 millimeter
Very well-maintained machine. The machine comes from a precision grinding shop in the Black Forest. It can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially...
Stuttgart, Germany
Trusted Seller
KELLENBERGER UR175-600 BEMA STEP
- Manufacturer: Kellenberger
- Model: UR175/600
- Grinding length: 600 millimeter
- Power requirement: 6.5 kilowatt
Reconditioned according to Kellenberger guidelines, including a new, modern, and future-proof control system. Photo of a previously delivered machine with a center distance of 1000 mm. -Operation via the touch pa...
Stuttgart, Germany
Trusted Seller
2023 KELLENBERGER KEL-VARIA R-RS 175-1000
- Manufacturer: Kellenberger
- Model: Kel-Varia
- Grinding length: 1,000 millimeter
As a global leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in new-machine quality and with a warranty, but can also offer you service for your machines. Photos of a nearly iden...
Stuttgart, Germany
Trusted Seller
2002 STUDER S21 Lean
- Manufacturer: Studer
- Model: S21
- Grinding length: 400 millimeter
Machine serviced and partially overhauled. -New grinding spindle bearing -New x-axis spindle -Upper table ground over -New table geometry -New WSS geometry for grinding spindles B-axis with 1° Hirth coupling Long...
Stuttgart, Germany
Trusted Seller
1990 KARSTENS K11
- Manufacturer: Karstens
- Model: K11
- Grinding length: 1,000 millimeter
Machine with very few operating hours after overhaul at Karstens Specialist. Jetter feed control Digital display Internal grinding device Tailstock with fine cylindricity adjustment Hydraulic tailstock quill Etc....
Stuttgart, Germany
Trusted Seller
1985 VOUMARD(CH) 403 L7 W/1000
- Manufacturer: Voumard
- Grinding length: 450 millimeter
large chuck, attached dresser, workpiece length max. 1000 mm
Metzingen, Germany
1980 NAXOS-UNION K 630/2500
- Manufacturer: Naxos-Union
cyclic control SPS / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius ...
Monheim am Rhein, Germany
Trusted Seller
1989 KELLENBERGER 1000U BEMA Advance
- Manufacturer: Kellenberger
- Model: 1000U
- Grinding length: 1,000 millimeter
- Power requirement: 6.5 kilowatt
As a global leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in new machine quality and with a warranty, but can also offer you service for your machines. Geometrically overhaule...
Stuttgart, Germany
Trusted Seller
2010 KELLENBERGER KEL-VITA with loader
- Manufacturer: Kellenberger
- Grinding length: 1,000 millimeter
Completely mechanically overhauled. Including grinding and setup on a single part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Tu...
Stuttgart, Germany
Trusted Seller
1983 MELCHIORRE(I) SP3 / 1000 / AUT
- Manufacturer: Melchiorre
Lapping machine for special injection parts Grinding wheel ø (mm): 1000 | Power kw): 6
Metzingen, Germany
Trusted Seller
2008 KELLENBERGER 600U BEMA Current
- Manufacturer: Kellenberger
- Model: 600U
- Grinding length: 600 millimeter
- Power requirement: 6.5 kilowatt
As a global leader in the Kellenberger overhaul/retrofit sector, we are not only able to deliver machines in new machine quality and with a warranty, but can also offer you service for your machines. Geometricall...
Stuttgart, Germany
Trusted Seller
1997 TAMUKAI(JPN) TLP.P. 810
- Manufacturer: TAMUKAI(JPN)
Single sided 3 position lapping machine with pressure cylinder, pneumatic
Metzingen, Germany
Trusted Seller
2022 KELLENBERGER KEL-VARIA UR175-1000 BEMA 90-3
- Manufacturer: Kellenberger
- Model: Kel-Varia UR175/1000
- Grinding length: 1,000 millimeter
As a global leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in new machine quality and with a warranty, but can also offer you service for your machines. Basis: Kellenberger Kel...
Stuttgart, Germany
Farros BSA 3000 Grinding machine
- Manufacturer: Farros
- Model: BSA 3000
Good condition Farros BSA 3000 Grinding machines manufactured in 2001. Located in Germany and other countries. Click request price for more information.
Germany