Used Foundry & Casting in Germany

1991 LAEMPE SM 5 3.5 T

• Manufacturer: Laempe / Röperwerk

Charge 70 kg, cycle time 70 s, capacity approx. 3.5 t/h, drive power 5.5 kW, connected loads 380 V, 50 Hz, volumetric sand dosing, binder dosing, control system

2015 SEGAB PROMIX 150

• Manufacturer: Segab

Charge min./max. 50/150 kg, capacity approx. 3 t/h, pneumatic discharge lock, drive power 9.2 kW, connected loads 400 V, 50 Hz, safety interlock (on cleaning door and mixer hood)

2006 SEGAB PROMIX 150

• Manufacturer: Segab

split daily silo (new sand/regenerated) of 2 m³ each, dust explosion filter, 2 sand heater-sieves, sand dosing, batch mixer 150 kg, ColdBox component dosing, core sand distribution wagon, electrical PLC control

1991 LAEMPE core-shosing machine L-10 HB

• Manufacturer: Laempe / Röperwerk

Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...

RÖPER H 2,5

• Manufacturer: Laempe / Röperwerk

Table machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, manual lever control

RÖPER H 2,5

• Manufacturer: Laempe / Röperwerk

Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...

1999 LAEMPE Core Drilling Auto LKFZ 40 (L-40)

• Manufacturer: Laempe / Röperwerk
• Model: LKFZ 40

Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...

1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

• Manufacturer: Vogel

Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...

VOGEL & SCHEMMANN MISCHKA II

• Manufacturer: Vogel

Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...

Sand dosing container

Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...

2014 KLEIN diaphragm dosing device BDG 504 (EFV)

• Manufacturer: Klein

Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)

2006 KLEIN diaphragm dosing device BDG 304

• Manufacturer: Klein

Dosing volume 200-300 cm³

2017 SEGAB cold box liquid dosing device FD

• Manufacturer: Segab

Two-component binder system, dosing pumps 2.23 l/min, 0.37 kW, switch cabinet, PLC control, dosing valves

1982 GISAG butterfly mixer AMF 160

• Manufacturer: Gisag

Mixing container, Ø 960 x 500 mm, usable capacity max. 160 dm³, discharge height approx. 675 mm, mixing blades, batch max. 200 kg, capacity approx. 3-4 t/h, pneumatic discharge gate, drive power 7.5 kW, connected...

1993 LUEBER LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Mains/control voltage 380/220 V, 50 Hz, heat output 8 kW, cold box process