Used Food & Beverage Processing in Bavaria, Germany

bottle filler and capper

• Manufacturer: KHS GmbH

Additional title: 50,000 bo/h, crown caps | Capacity: 50000 bph | Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps | Running direction: rigth -> left | Operation / control: Siemens S5 | Base const...

Wort aeration

• Manufacturer: Turbo Air

Turbo Air Wort aeration DN40 mounted on frame, mobile

Spent grains compressor

• Manufacturer: EP Energy Proceeding Energie und Umwelttechnik Robert Kupka

Rotation speed: 1450 U/min | Inlet capacity: 360 Nm³/h | Pressure: 1 bar | Rotation speed of the motor: 1765 U/min | Power: 22 kW / 22 kW / 22 kW / 25,3 kW | Current: 44Δ/25,4Y A / 43,5Δ/24,6Y A / 43Δ/23,8Y A / ...

Wort cooler

• Manufacturer: vbw-weihenstephan

Max. operating pressure: 8 bar | Material: stainless steel

Capper for swing top bottles

• Manufacturer: Rico

Capacity: 18000 bottles/h | Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Label and fill level control

• Manufacturer: Heuft

Inspection unit for fill level inspection by high frequency, label inspection, ejection unit Heuft Delta FW 10

Crown cap bunker

• Manufacturer: Crown

Additional title: Transport system for closures

Whirlpool

• Manufacturer: Whirlpool

Additional title: trub removal | Capacity: 182 hl | Volume net: 150 hl | Volume gross: 182 hl | Material: 1.4301 | Position: outdoor | Features: insulation (100 mm mineral wool)

wort aeration

Ventilation unit for wort preparation. A stainless steel sintered cartridge distributes the precisely adjusted amount of sterile air finely throughout the wort stream during preparation.

Pub brewery plant

• Manufacturer: Johann Albrecht (JBT)

Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One ves...

Capper

• Manufacturer: Marchesini

Capper for twist-off caps. With lid storage container and lid sorting system for positioning and transporting lids to the capper. Injection of the lids with sterile steam.

glass bottle vacuum filler

• Manufacturer: Nagema

with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydrau...

wall cabinet

Additional title: from stainless steel | Material: stainless steel | Position: wall-mounted | Features: 2 floors, sliding doors

Glass bottle rinser, filler and capper

• Manufacturer: IC Filling Systems

Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves...

Mash/lauter tun

• Manufacturer: ROLEC

Mash/lauter tun with side heating. The vessel was used in a distillery where 400 kg of malt grist was used to produce 15 hl of wort with 16.5°Plato. The lautering time was approx. 2 hours.