Used Extruders in Illinois, USA

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

COPERIAN ZSK-40 40MM TWIN SCREW 18943

Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

WERNER & PFLEIDERER ZSK40 TWIN 17698

• Manufacturer: WP

Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/...

STEER ENGINEERING 12mm TWIN SCREW 16620

Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...

WERNER & PFLEIDERER ZSK20 TWIN 17702

• Manufacturer: WP

Werner & Pfleiderer Model ZSK20 20mm co-rotating twin screw extruder. S/N 02-3108-1000-010-1, Has 40:1 L/D barrel at a 43″ center line driven through a 3:1 gearbox with a 37 newton meter torque capacity per screw...

DAVIS STANDARD 3.5″ SINGLE STAGE 12024

• Manufacturer: Davis-Standard

Davis Standard 3.5″ single stage extruder screw. Approximately 24:1 L/D with five mixing pin sections.

UNK MFG 4.5″ SINGLE SCREW 12403

Unk Mfg. 4.5″ single screw extruder barrel, non-vented, 24:1 L/D, 13″ OD, 8 bolt flange mount. Threaded end to accept screen changer. 102″ overall length.

DAVIS STANDARD 3.5″ 30:1 75 18867

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...

DAVIS STANDARD 8″ 900 HP 18828

• Manufacturer: Davis-Standard

Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...

DAVIS STANDARD 4.5″ 30:1 L/D 18589

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45CT extruder. S/N P5568. Shop order 53447. Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 42″ centerline. Water ...

GLOUCESTER 2.5″ 24:1 L/D 60 18350

One (1) Used Gloucester model 25225R2 2.5″ 24:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ center line height. S/N 36736/19. Barrel is set up for Contra-Cool ...

WELEX 3.5″ 30:1 L/D 150 17954

• Manufacturer: Welex

One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...

DAVIS STANDARD 75mm 32:1 L/D 18831

• Manufacturer: Davis-Standard

One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...

A&G EXTRUSION 30MM 3 HP 18677

• Manufacturer: A&G Mercury

One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...