Used Evaporators

Rising/Falling Film Evaporator 9,400 kg/h (20,723 lb/h) Stainless Steel 316 - IPP# 706886

• Manufacturer: Kleiser Gmbh

single effect falling film evaporator pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate single pass tubeside, 316Ti (1.4571) stainl...

LCI (Luwa) Wiped/Thin Film Evaporator Pilot Skid 5.1 sq. ft. - IPP# 247796

• Manufacturer: Luwa

Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169

• Manufacturer: Hitachi

Wiped/Thin Film Evaporator 158.8 kg/h (350 lb/h) Stainless Steel 316 - IPP# 211714

• Manufacturer: Buss-SMS-Canzler GmbH

Short Path wiped film evaporator system with internal condensrr includes SS seperator tank Rated 2000 liter 95 liter in the jacket. Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on ...

Rising/Falling Film Evaporator 9,573 kg/h (21,105 lb/h) Stainless Steel 304 - IPP# 247011

• Manufacturer: Buflovak/Blaw Knox

Second Effect separator replaced by IPS, Inc.-Condenser changed from original design and now is an Alfa Laval spiral, IPP stock # 246876. 270 Sq.Ft., 316 SS clad on CS, 55 psi at 300 degrees F.

Rising/Falling Film Evaporator 1,361 kg/h (3,000 lb/h) Stainless Steel 316 - IPP# 201492

• Manufacturer: DeSmet

Rebuilt wetted parts Z6 CND 17-11 (316Ti) total volume 2.470 liter rated header -1/0.8 bar @ -10/160 degrees C total volume 4.150 liter body 8,240 mm lonx x 914 mm dia Wet dust separator SS parts passivated mat 1...

Wiped/Thin Film Evaporator 195 kg/h (430 lb/h) Stainless Steel 316 - IPP# 87894

• Manufacturer: Luwa SMS

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 ...

Wiped/Thin Film Evaporator 72.6 kg/h (160 lb/h) Stainless Steel 316 - IPP# 211632

• Manufacturer: CARL GANZLER

Short Path wiped film evaporator system with internal condensor 650 liter internal 45 liter in the jacket top mounted rotor drive with a 2.2 kW/50 Hz gear motor with mechanical seal on rotor, (72) Graphit wipers ...

Wiped/Thin Film Evaporator 11.3 kg/h (25 lb/h) Stainless Steel 316 - IPP# 102461

• Manufacturer: Luwa SMS

wiped film evaporator/filmtruder body only. Jkt rated 16 psi. 6" dia x 5'6" long.

Wiped/Thin Film Evaporator 45.4 kg/h (100 lb/h) Stainless Steel 316 - IPP# 38727

• Manufacturer: Artisan

Consists of 20 sq ft Artisan horiz 316SS thin film evaporator. jkt rated 150 psi @ 400 deg F. 316SS rotor. Shell 2' dia x 5'6" long; btm head 2' dia x 2' long. Segmented. Mech seal. Belt driven by 7.5 HP, 1170 rp...

Rising/Falling Film Evaporator 7,257 kg/h (16,000 lb/h) Stainless Steel 316 - IPP# 246894

• Manufacturer: Swenson

With Condenser and Schutte & Koerting 10" thermo compressor. 246877 1450 Sq.Ft. 316 SS clad on CS 65 psi at 200 degrees F.

Rising/Falling Film Evaporator 2,268 kg/h (5,000 lb/h) Stainless Steel 304 - IPP# 216077

• Manufacturer: Paget Equipment

72" OD x 111 straight side 2000 gallon capacity "U" tube heater Size 35-42 Channel head is CS Vessel includes Koch style 931 6" thick denmister. Bundle is 36" x 5', Channel head is CS. Channel head is CS.

Stainless Steel 316L Luwa SMS KH-600-S SAKO Wiped/Thin Film Evaporator - IPP# 221539

• Manufacturer: Luwa

thin film evaporator jacket -1/1.1 bar @ 350 deg C (110ltr) 316L s/steel (1,4404) chamber, c/steel jacket on straight side only, 316L s/steel rotor, Crane 109 double mechanical seal with lubricator, speed 191 rpm...

Wiped/Thin Film Evaporator 97.5 kg/h (215 lb/h) Stainless Steel 316 - IPP# 236071

• Manufacturer: DeDietrich

jacketed thin film evaporator with condenser internal pressure -1/atmospheric @ 160/190 degrees C (735 liter) jacket 12 bar @ 190 degrees C (105 liter) 450mm diameter x 4139mm long rotor, total height 5160mm DeDi...

Wiped/Thin Film Evaporator 626 kg/h (1,380 lb/h) Stainless Steel 304 - IPP# 31726

• Manufacturer: Buflovak/Blaw Knox

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor spe...