Used Evaporators

Stainless Steel 321 Buhler Group OTW-890 Crystallizer/Evaporator Plastic - IPP# 219978

• Manufacturer: Bühler

used on PET pellets fluid bed crystallizer product weight 720-820 kg/m3, granule density 1340 kg/m3, viscosity of granule 830 (SV)

Stainless Steel 321 Buhler Group OTW-500 Crystallizer/Evaporator Plastic - IPP# 219970

• Manufacturer: Bühler

stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate ...

Rising/Falling Film Evaporator 7,421 kg/h (16,360 lb/h) Graphite - IPP# 233950

water evaporation rate @5 lbs./Hr. per Sq. Ft. of surface area Fiberglass double effect falling film evaporation system Designed to operate with corrosive conditions The system includes the following major compon...

Stainless Steel 316 Votator Div 08-032 Wiped/Thin Film Evaporator - IPP# 101542

• Manufacturer: Votator

turbo-film evaporator 316SS/CS jkt jkt rated 150 psi @ 700 deg F Shell .250" thick, jkt .187" thick 12" x 20" entrainment section. Belt driven by US varidrive, 7 1/2 HP, 3/60/220/440 volt, output min 190 rpm, max...

Stainless Steel 316 Luwa SMS LB-0050 Wiped/Thin Film Evaporator - IPP# 217821

• Manufacturer: Luwa

jacketed wiped thin film evaporator with column and condenser pressure internal -1/3 bar @ 250/350 deg C (38ltr) jacket 29.6/26.9 bar @ 250/350 deg C (6ltr) s/steel jacket on straight side only, rotor belt driven...

Zymark TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Zymark

The Zymark TurboVap 96 Concentration Evaporator Workstation, Part #71000/1, is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operatio...

Biotage TurboVap 96 Concentration Evaporator Workstation

• Manufacturer: Biotage

The TurboVap 96 Concentration Evaporator Workstation is a microprocessor-controlled evaporation system for simultaneous, automated concentration of multiple samples with unattended operation, convenience and spee...

Stainless Steel 316 Luwa SMS HS0050 Wiped/Thin Film Evaporator - IPP# 102561

• Manufacturer: Luwa

jkt rated 16 kg/sq cm @ 200 deg C. 9 gal capacity W/(2) rows of str blades and (2) rows of positive pitched blades @ 25 deg angle on central core. Driven by 20 HP, 1170 rpm Reeves variable speed drive, 6.2:1 rati...

Stainless Steel 316L Luwa SMS HM-1200 Wiped/Thin Film Evaporator - IPP# 706885

• Manufacturer: Luwa

jacketed thin ‘filmtruder’ evaporator system, internal pressure -1/3.2 bar @ 200 degrees C (3900 liter), top jacket 7 bar @ 200 degrees C (11 liter), straight side jackets 7 bar @ 200 degrees C (3 x 65 liter), bo...

Rising/Falling Film Evaporator 9,400 kg/h (20,723 lb/h) Stainless Steel 316 - IPP# 706886

• Manufacturer: Kleiser Gmbh

single effect falling film evaporator pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate single pass tubeside, 316Ti (1.4571) stainl...

LCI (Luwa) Wiped/Thin Film Evaporator Pilot Skid 5.1 sq. ft. - IPP# 247796

• Manufacturer: Luwa

Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169

• Manufacturer: Hitachi

Rising/Falling Film Evaporator 6,700 kg/h (14,771 lb/h) Stainless Steel Austenitic - IPP# 706887

• Manufacturer: Kleiser Gmbh

single effect vertical falling film evaporator jacket -1/6 bar @ 200 degrees C (1100 liter), 6.7 m3/hour evaporation rate Fabrik #3981 single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 800mm diamet...

Wiped/Thin Film Evaporator 195 kg/h (430 lb/h) Stainless Steel 316 - IPP# 87894

• Manufacturer: Luwa SMS

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 ...

Wiped/Thin Film Evaporator 47.6 kg/h (105 lb/h) Stainless Steel - IPP# 217500

• Manufacturer: Luwa SMS

Luwa wipe film evaporator jacket 4 bar, c/steel jacket 2 x 340mm diameter x 1.1m long clamped sections