Used Construction in Styria, Austria

Avola table construction saw

• Horsepower: 5.2 horsepower

Avola table construction saw Fixed cutting height of 145 mm Safety guard Folding table extension Angle-adjustable cross and wedge cutting gauge Rip fence with 2 contact edges and millimeter-precise measuring scal...

Ceiling support 3.60m painted

Painted props 3,60m Construction props made of steel with a red dip-paint finish. Decoupling system - this enables the prop to be quickly dismantled with little effort Foot reinforcement - by mounting a stronger ...

H16 Timber girder formwork beam

H16 wooden formwork beam Height 16cm, width 65mm, weight 3.3kg/meter The proven components for many formwork systems. Formwork beams are the basis of many formwork systems and can be used universally. The careful...

Hünnebeck Manto 330

• Manufacturer: Hünnebeck

Hünnebeck Manto 330 Wall formwork for use on construction sites by crane. Available articles: Manto articulated corner 35/330

Hünnebeck Topec, 408m2

• Manufacturer: Hünnebeck

Hünnebeck Topec, 408m2 Modular slab formwork from Hünnebeck for faster work. The Hünnebeck Topec system consists of two basic elements - panels and props. Perfect results in just a few work steps Easy handling Ro...

Shuttering panel 3-layer ECO 27mm

The inexpensive three-ply board for all standard applications. A formwork panel in the medium quality and price segment for daily construction site use and for all conventional areas of application. Low deformati...

Peri bar 85

• Manufacturer: Peri

116 x Peri bar 85 EUR 30,00 per piece

Doka head spindle

• Manufacturer: Doka

Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50

Doka foot spindle

• Manufacturer: Doka

Doka foot spindle Lower spindle (height-adjustable) for shoring. 9.00 kg EUR 35.70 per piece

Peri shut-off bar 105

• Manufacturer: Peri

Peri stopend rail 105 Slab edge formwork up to 50 cm thick can be formed with stopend rail 105. EUR 29.00 per piece

Doka Framax element 120 x 330 Uni

• Manufacturer: Doka
• Model: Framax

Doka Framax panel 120 x 330 Uni The frames and formlining are in good condition and can be used immediately. The high-performance steel-framed formwork for large-area forming by crane. Large panel for fast shutte...

Peri Ergo support 3.00m

• Manufacturer: Peri

Peri Ergo prop 3.00m The hot-dip galvanized floor prop complies with load classes B and D in accordance with DIN EN 1065. The maximum load capacity is up to 50 kN. Thanks to hot-dip galvanizing, the Peri Ergo pro...

Peri concreting platform trio

• Manufacturer: Peri
• Model: Trio

Peri concreting platforms Trio Working and concreting platform for MAXIMO and TRIO. Is attached to the element from above and is therefore self-locking. The material is in good condition and can be used immediately.

Peri Maximo 165m²

• Manufacturer: Peri

Peri Maximo 165m² The MAXIMO panel formwork is effective and designed for single-sided operation, It can be used vertically or horizontally and has sophisticated safety technology. All floor plans can be formed w...

Doka Alu Framax 127 m2

• Manufacturer: Doka
• Model: Framax

Doka Alu Framax 127 m2 Good condition of frame and formwork facing (partly new Finply formwork facing or used X-Life formwork facing) Due to its lower weight, the aluminum framed formwork is suitable for forming ...