Used Construction in Baden-Württemberg, Germany

Augers 1 cutting edge

1 cutting edge, spiral-pilot. Ø of auger-flight = 560 mm!! Cutting-Ø can easily be reduced to Ø 600 mm!

BAUER

• Manufacturer: Bauer

type SBF, 1 cutting edge with 2 teeth, 3 rock bits + pilot with 3 rock bits

BAUER

• Manufacturer: Bauer

type SB, 1 cutting edge, 2 teeth + spiral-pilot Ø mm: 650 | * l/f: L | Total length mm: 2380 | Weight kg: 491 | Kelly- box: 110

SOILMEC ?

• Manufacturer: Soilmec

progressive auger, 1 cutting edge, 8 rock bits + pilot 2 rock bits

Augers 1 cutting edge

1 cutting edge, 2 rock bits + pilot with 2 rock bits

BAUER

• Manufacturer: Bauer

type SBF, 1 cutting edge with 2 rock bits + pilot with 3 rock bits

Bracket with pulley for pull back for drilling gear KLEMM GH 120

• Manufacturer: Klemm

good

Rotary drilling rigs swivel / twist catcher BADE

swivel / twist catcher BADE, load capacity 8 - 10 to, suitable for grab BADE E80-BSG, ready for installation, with grease nipple unused!

Acessories for drilling work Grout plant / mix-pump-unit STS SCHELTZKE MPS 100 E-B

Grout plant / mix-pump-unit STS SCHELTZKE MPS 100 E-B, from 2008, on skid frame, 1 pc. mixing container with bag opener, usable capacity 200 liters, 1 pc. stainless steel water storage and dosing tank, usable cap...

Acessories for drilling work Add-on auger drive (manufacturer )

Add-on auger drive (manufacturer unknown), with guides for DELMAG leader type MD/MH/MA -17 + MH/MS/GF-22. Main and intermediate gearbox with hydraulic motor type SAUER DANFOSS, installed in drilling bell. With h...

Casing oscillators reduction set LEFFER Ø 750 mm

reduction set LEFFER Ø 750 mm, 4-part, e.g. for LEFFER casing oscillator, tube extracting machine a.s.o. good, ready for use

Rotary drilling rigs 1 centring device for columns

1 centring device for columns, Ø 900 mm, manufacturer unknown, system CASAGRANDE very good

Rotary drilling rigs 1 centring device for columns

1 centring device for columns, Ø 900 mm, manufacturer unknown, system CASAGRANDE very good

Rotary drilling rigs 1 centring device for columns

1 centring device for columns, Ø 1.180 mm, manufacturer unknown, system BAUER/LEFFER good

Rotary drilling rigs 1 centring device for columns

1 centring device for columns, Ø 1.300 mm, manufacturer unknown, system PD-Switzerland very good