Used Construction in Berlin, Germany

2004 O&K Raupenbagger RH 9.5

• Manufacturer: O&K
• Model: RH9
• Horsepower: 230.6557992811349 horsepower
• Operating weight: 33,600 kilogram

We are slaughtering O & K crawler excavator RH 9.5, currently. still available: all cylinders, rotary union, control levers and accelerator pedals, oil engines, control block, tanks oil and fuel, fairing cabins, ...

2004 O&K Drehdurchführung / Rotor

• Manufacturer: O&K
• Hours: 2,000 hour

Rotary union / rotor for O & K crawler excavators RH 6.5 / 8.5 / 9.5 O & K Part number # 8902421 # also rotary unions for crawler excavators from RH 4 to RH 20 as well as rotary unions for wheeled excavators MH 4...

1996 O&K Drehdurchführung / Rotor

• Manufacturer: O&K
• Hours: 2,000 hour

Rotary feedthroughs for wheeled excavators MH 4 to MH 6 e.g. 2105379, 1754640 ect also rotary unions for crawler excavators from RH 4 to RH 20 and special rotary joints for two-way excavators (6-fold rotor) in st...

2008 O&K Steuerblock

• Manufacturer: O&K

6-fold control block for O&K crawler excavators RH 12.5 / 16.5 / 23.5 with function depressurize, good, used, tested condition O&K part number 4530984 = 4531168 = 4532120

Piling and pulling device ABI 5-fold

Hydraulic drive Mass: 11 t

Piling and pulling device PVE 4125 4-fold

4 cylinders Mass: 11 t

1989 Soilmec MGT 1000

• Manufacturer: Soilmec
• Machine weight: 4,800 kilogram

This unit can be attached to drilling rigs. An optional hydraulic power pack is available. Immediately ready to work.

1998 Hazemag EH 185 K

• Manufacturer: Hazemag
• Hours: 250 hour
• Gross weight: 9,800 kilogram

Clamping force: min. 30 kN Operating hours: 250 | Pulling force: 30 kN | Torque kn: 2.100 | Total weight: 9.800 kg | Centre distance: 2.000 mm | Specific ground pressure: 9.4 t/m2 | Ground clearance: 180 mm | Ggr...

2004 O&K Hydraulikzylinder MH 5.5 / Compact

• Manufacturer: O&K
• Model: MH 5.5
• Machine weight: 190 kilogram

Boom cylinder from storage machine suitable for O & K mobile and tracked excavator MH 5.5; MH 5 Compact; MH 5 S two-way device; RH 5.5; RH 6 Compact suitable for part numbers 4531106 This is only a small excerpt ...

2004 O&K L 25.5

• Manufacturer: O&K
• Model: L 255

used wheel hub complete for front axle O & K wheel loader L 25.5 O & K part no. 2806121 differential complete O & K part number 2494543 plate / bevel gear set O & K part number 2494484

1996 O&K L 25;30

• Manufacturer: O&K
• Machine weight: 350 kilogram

2 pcs. wheel hubs / wheel hub complete O&K part number 4920786 from rear axle O&K wheel loader part number 4922243 bevel and ring gear O&K part number 4922238 2 pcs. wheel hubs / wheel hub complete O&K part numbe...

1994 O&K Fahrölmotor RH 8

• Manufacturer: O&K

Cruise engine (VOAG Volvo) with brake valve for O & K crawler excavators RH 8 / RH 6 PMS, O & K Part number 1450706, used, tested condition

2003 O&K Rohrbruchsicherungen

• Manufacturer: O&K
• Machine weight: 10 kilogram

Pipe rupture protection new and used (tested), suitable for O & K part number 2186523 and others u.a. for O & K excavator MH / RH 5; MH / RH 6 and 6.5 Handle Cylinders and Neck Cylinders This is just a small exce...

2000 O&K Steuerblock RH 9 / 12.5 / 20 u.a.

• Manufacturer: O&K
• Model: RH9
• Horsepower: 230.6557992811349 horsepower
• Operating weight: 33,600 kilogram

6-speed control block for O & K crawler excavators RH 9 PMS / RH 12 PMS; 12.5 / RH 16 PMS; 16.5 RH 20 PMS / RH 23.5 This is just a small excerpt from our delivery program of used and new O & K spare parts or add-...

2001 O&K Drehdurchführung / Rotor

• Manufacturer: O&K

Rotary union / rotor for O & K wheeled excavators, O & K part no. 2459380, suitable for O & K MH 4; City; Plus, 5 and MH .5 units with wet disc brakes without air system, rotary feedthrough in used and tested con...