Building Filters

Used Centrifugal Separators in Hiroshima, Japan

Tanabe AT-48
- Manufacturer: タナベ
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: タナベ
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: 共立製作所
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
Tanabe 42-inch
- Manufacturer: タナベ
42", top discharge type, perforated type. Basket SUS, others SS.
Hiroshima, Japan
1989 Matsumoto Machinery Works MARK III 48 × 30
- Manufacturer: 松本機械製作所
Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G
Hiroshima, Japan
Tikara Engineering 60 × 25 1/2 type
- Manufacturer: チカラエンジニアリング
Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...
Hiroshima, Japan
There is no nameplate 24 吋
- Manufacturer: 銘板無し
Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...
Hiroshima, Japan
2024 Tanabe Wiltech SHC-400D
- Manufacturer: タナベウィルテック
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
2007 IHI IX-36T
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2006 Kotobuki SC-170
- Manufacturer: 寿工業
Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...
Hiroshima, Japan
Tomoe Kogyo P-3400
- Manufacturer: 巴工業
3650rpm / approx. 3000G. Gear ratio 1/165. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1991 Mitsubishi Kakoki KZV25ML
- Manufacturer: 三菱化工機
Power: 11kw/200V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
1987 Tanabe Wiltech Z32-V-HP1
- Manufacturer: タナベウィルテック
5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
1979 Shear Press P-3400L
- Manufacturer: シャープレス
30kw 4000rpm/3200G Tile specification Power: 30kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
IHI HS-40L
- Manufacturer: IHI
- Model: HS-40
4000rpm/3500G Nominal capacity: 7t/h Power: 22kw/200V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan